0
Каталог товаров

UNIVERSAL
LIGHTING
UPDATE 2020
www.hella.com/truck
www.hella.com/agriculture
2PS 013 305-011 2SB 013 399-021 2BA 013 333-021 2ZR 013 401-111 8RA 013 347-061
TRUCK
CUSTOMISED LIGHT DESIGN!
The great variety of shapes and various possible
combinations coupled with a technically
optimised product design: the universal,
modular HELLA Shapeline lamp series is a true
innovation in vehicle lighting.
Whether at the front, side or rear of a vehicle,
every vehicle series—whether big or small—can
have a unique and, at the same time, consistent
look using a customised configuration and
arrangement of lamps. Even small vehicle series
benefit from HELLA Shapeline's striking optics
and high recognition value.
Alongside innovative technology and the familiar
high quality of HELLA products, the variety of
Shapeline lamps shapes provides you with nearly
infinite design freedom.
All HELLA Shapeline lamps are available in
two different designs: the classic straight-line
Shapeline Tech design and the dynamic curved
Shapeline Style design.
2SD 013 342-12
1
8RA 013 347-06
1
AGRICULTURE
Configuration examples
The HELLA Shapeline online configurator turns
customers into lighting designers:
In just a few clicks, create your own customised
vehicle lighting design for the front, side and rear of
the vehicle and then view the result immediately
afterwards, when it gets shown on an indicative
vehicle outline.
www.hella.com/shapeline
THE SHAPELINE CONFIGURATOR:
DESIGN A LIGHT!
GOOD IN EVERY WAY:
UNIVERSAL LIGHTING FROM HELLA
Good vehicle lighting has many facets.
It not only provides optimum illumination of the work area and,
therefore, greater working efficiency, but also offers a high degree of
safety for all road users.
This rings particularly true with the HELLA universal lighting products
for agricultural machinery, trucks and trailers. Because powerful
vehicles require powerful lighting – and that's why HELLA is exactly the
right partner for you. From work lights and front, side and rear lighting
to auxiliary headlamps: we offer a broad range of high-quality products
characterised by fit accuracy, durability and innovative technologies.
Throughout, we use our longstanding OE expertise and successfully
apply it to the independent aftermarket.
In this brochure, you will find a selection of universal lighting products:
efficient all-rounders that you can rely on.
These include the Luminator LED and Rallye 3003 LED, our latest
auxiliary headlamp offerings that give light a whole new style thanks
to powerful technology and an equally powerful appearance. Or K-LED
Rebelution, our beacon revolution that boasts both a minimalist design
without a dome and maximum functionality.
In our universal parts catalogue, you will find an overview of our
complete universal parts product range, which includes not only lighting
but also electrical and electronic products and is available online.
www.hella.com/upc
Discover the light distribution of the HELLA work lights and auxiliary
headlamps with ELIVER, our unique online tool.
www.hella.com/eliver
www.hella.com/eliver
4
Work lights/reversing lights ....................................10
Beacons ...................................................34
Front lighting ...............................................44
Auxiliary high beam headlamps .................................52
Rear lamps .................................................64
Side marker lamps ...........................................78
Marker lamps ...............................................82
Product overview .............................................92
Order number overview ........................................94
NEW
NEW
What does IP protection class mean?
IP stands for International Protection. The IP protection classes
are determined according to DIN 40 050, Part 9. The purpose of
the norm is to provide an exact definition of the electrical
equipment of vehicles against the ingress of solid foreign
objects including dust, and against the ingress of water.
The varying degrees of protection important for signalling
systems are explained in more detail below.
Protection class IP 5K4K
Dust may only penetrate to such an extent that the function and
safety are not impaired. Water that is sprayed against the
housing from every direction at increased pressure must not
have any damaging effect.: the water pressure is approx. 4 bar.
Protection class IP 9K
Water that is directed from high-pressure/steam-cleaning
equipment onto the housing must not have any damaging
effect: the water pressure is approx. 80-100 bar.
Protection class IP 6K7/IP 6K8
Dust must not penetrate. Even during temporary (IP 6K7) or
permanent (IP 6K8) submersion, no water is allowed to
penetrate. HELLA products meet the highest requirements and
are optimally protected against all weather conditions.
International Protection (IP) according to DIN 40050,
Part 9.
Specific definition for road vehicles.
5K = Dust protected
6K = Dustproof
9K = Protection against water during high-pressure /
steamjet cleaning.
The higher the protection class, the better the
protection against penetrating media. IP 67 maximum
value
Completely sealed against dust and water.
Dust and water protection IP
Vehicle electrical system voltage
Power consumption of
LED lamps
Benefits of LEDs:
In general, LED lamps require less power than bulb
lamps. Savings of up to 90 % are possible, thus
helping to reduce CO
2
emissions.
Defines the power supply of the lamp.
Whether 12 V, 24 V or for a multi-voltage range
(8–w33 V).
Multi voltage is most flexible:
it requires fewer versions, but has more electronic
components and is therefore more expensive.
Resistant to high-pressure cleaning
FEATURES DESCRIPTION COMMENTS
IP protection classes
Features and descriptions
Key of icons
Features, descriptions and comments
6
Regulation according to ECE R48:
The driver must be informed if the vehicle's direction
indicator function fails. To remain legally compliant,
this requirement must also be fulfilled for LED lamps.
This requirement is met thanks to an integrated self-
diagnosis system on the printed circuit board of the
LEDs and an electrical pulse. Since the end of 2011,
this HELLA failure control with pulse has been an
ISO standard: ISO 13207.
If the direction indicator failure control cannot be
guaranteed, the General Certification for a vehicle
expires. It is therefore forbidden to operate vehicles
without the legally required direction indicator failure
control in countries subject to ECE-R48.
The direction indicator failure control is guaranteed
in combination with ballasts, HELLA item no.:
5DS 009 552-...
Direction indicator
failure control according to ECE R48
Electronic circuit
Basically, two different circuits are possible for LED
lamps:
Active:
LED current regulation by means of active electronics.
Passive:
Setting a specific voltage range for the
LED using a series resistor.
Active:
Higher expenditure during development because of
complex circuit and necessary EMC approval. Higher
price because of electronic components but an optimal
current limit makes for a maximum LED service life.
Passive:
Inexpensive solution without complex protection
measures. Shorter LED service life in case of failure.
No EMC approval required.
Active
Passive
Thermal management
Operating temperature
Active:
Electronic power control of the LEDs when high
ambient temperatures exceed permitted levels. This
ensures that LEDs are protected against destruction
caused by overheating.
Passive:
Optimised layout of the components for even
temperature distribution and temperature spread.
Whether at cold or warm temperatures, our products
must be functional at all times. Thermal management
and an optimised housing design ensure full
functionality for all operating temperatures as a result
of product testing from -40°C to 100°C.
Active:
Higher expenditures with active thermal management
for development and higher parts prices ensure
optimal conditions for maximum service life.
Passive:
The warmer the LED gets due to exterior factors or
heating caused by its own operation, the shorter the
service life.
Active
Passive
FEATURES DESCRIPTION COMMENTS
7
Even if the connecting cable is connected with reverse
polarity, there is still no danger to the electronics.
The semiconductor in an LED must always be operated
with the specified polarity only. Inverse polarity
damages the LED: therefore, LED lamps are always
equipped with polarity reversal protection (diode).
However, this function only works if "+" and "-" are
connected correctly. If a lamp has a bi-polar circuit, its
functioning is independent of the contact connections.
This then ensures that poka yoke (avoidance of faulty
assemblies) is present in connection with indentation
clamping technology, for example. However, the
additional components on the printed circuit board
increase the cost outlay.
Polarity reversal protection
The product has been tested according to SAE
specifications.
Further information can be found next to the relevant
products in the footer.
SAE
Even if the connecting cable is attached with reverse
polarity, the LED functions fully.
The semiconductor in an LED must always be operated
with the specified polarity only. Inverse polarity
damages the LED: therefore, LED lamps are always
equipped with polarity reversal protection (diode).
However, this function only works if "+" and "-" are
connected correctly. If a lamp has a bi-polar circuit, its
functioning is independent of the contact connections.
This then ensures that poka yoke (avoidance of faulty
assemblies) is present in connection with indentation
clamping technology, for example. However, the
additional components on the printed circuit board
increase the cost outlay.
Bi-polarity of a lamp
FEATURES DESCRIPTION COMMENTS
Overvoltage protection
Supplement to the electronics for protecting the LED
against high voltage/current in the vehicle network as
per ISO 7637-2.
The LEDs can become overloaded by increased voltage
peaks in vehicles as a result of the following:
Starting aid
Defective control units
Load dump impulse
(incorrect battery contact)
Such peaks stress/damage the LEDs, a situation
which can lead to function failure or to a reduction in
the length of service life. By supplementing the circuit
with appropriate components, it can be protected, so
that the service life can be extended and failures can
be prevented.
8
Electromagnetic compatibility
Electromagnetic compatibility (EMC) tested
and EC type approval obtained.
If the lamp is not designed and constructed according
to EMC specifications, and thus is not certified, then
interactions between it and other safety-relevant
electronic systems may occur.
Examples:
Crackling in the radio loudspeaker, impairment of ABS
electronics or lamp failure as a result of sensitivity to
interference.
Lamp approved for dangerous goods transport
according to the European Agreement Concerning the
International Carriage of Dangerous Goods by Road
(ADR; in German: GGVS).
Mainly required for truck and trailer lighting.
Precondition for approval: damage to the light source
must not cause explosive media to ignite.
Approved for dangerous goods transport
Further information can be found next to the relevant
products in the footer.
This product is approved according to ECE guidelines.
ECE
Automotive Electronic Council
Components qualified according to automotive
standard.
Electronic components (LEDs, diodes, etc.) governed
by automotive specifications are more robust and safer
than electronic components designed for industry.
By using certified suppliers, a more robust circuit
design is possible with consistent quality, even for
longer periods. Therefore, low additional component
costs improve the service life of LED lighting functions.
FEATURES DESCRIPTION COMMENTS
9
HELLA WORK LIGHTS
For more safety and comfort
Nighttime assignments, whether they include shunting manoeuvres, loading work or field work, have one thing in
common: they require optimal work area illumination. And good illumination requires good headlamps! This is the only
way to carry out focused work with an efficient result.
That's no problem when using the HELLA work lights! Thanks to our many years of experience, these generate the
right workplace illumination for any area of application. HELLA work lights make every nighttime operation simple,
whether that's in agriculture, in trucks or in trailers.
Designed for the toughest working conditions!
Thanks to modern technologies developed using our OE know-how, HELLA work lights can withstand the most challenging
environmental conditions. The headlamps' sophisticated thermal management and corrosion resistance in particular ensure a very
long service life. After all, high-power illumination performance can only go unhindered if the heat can be optimally dissipated from
the high-power LED headlamps. A long service life is guaranteed thanks to corrosion-resistant headlamps with special coatings or
plastic housings. Go for the best quality and increase your working efficiency.
CoroSafe/NanoSafe
New process to combat corrosion in aluminium housings
With its new coating processes against corrosion, HELLA is once
again setting standards in the durability and toughness of work lights
with aluminium housings. Two additionally implemented layers in the
surface coating of the work lights greatly improve their durability. The
sophisticated combination of different coating methods ensures a high
level of corrosion resistance and improved protection against work light
damage. This means that the housing is well-protected and ideal for use
in environments with large amounts of salt and water. CoroSafe is used
primarily with HELLA LED reversing lights. When using the NanoSafe
coating for special applications, such as mines, an additional coating is
applied. This protects against corrosion in particularly tough applications.
Compact series
Corrosion-free and lighter plastic housing
The innovative plastic housing of the Compact series boasts similar
thermal conductivity properties to aluminium. This allows the LEDs to
operate using the full power supply even at high ambient temperatures.
Thanks to the housing's innovative plastic material, corrosion is averted
and a long service life is guaranteed. In addition, the Compact scores
points with its considerably reduced weight and improved vibration
characteristics.
Innovative heat-conducting plastic housing to combat corrosion
CoroSafe coating for work lights with an
aluminium housing
NanoSafe coating for work lights with
an aluminium housing for particularly
tough applications such as mines
Videoclip - CoroSafe and Thermo Pro
Scan, watch now and find out more.
WORK LIGHTS 11
ZEROGLARE technology for glare-free illumination
In order to transfer the same safety and convenience seen in the
automotive sector to other target groups, HELLA has developed a new
optical system for work lights. The ZEROGLARE system ensures that
drivers in oncoming vehicles are not dazzled. Unlike the usual LED work
lights, the cut-off line is very sharp and the light of the ZEROGLARE
headlamp is directed specifically at the area in front of the vehicle.
Several series are already available with this technology.
HELLA solutions for more safety and comfort in your everyday
working life
Vehicle lighting plays an important role in safety and workplace convenience. There are many situations where there is still room
for improvement, especially when it comes to occupational safety. For example, it is important that hazard zones can be optically
marked or demarcated at any time so that everyone in the affected area can be warned and protected in good time. Previously, this
had to be done by the driver or by other workers, who would manually mark off the areas concerned. This meant that it was not
possible to demarcate individual areas as required in a simple, swift and safe action. With the VISIOTECH projection technology,
HELLA has brought products onto the market that are designed to help in these exact situations. However, oncoming traffic should
not just be warned or alerted. It is also important that it is dazzled as little as possible in order to avoid accidents caused by glare
and poor visibility. That is why HELLA has developed ZEROGLARE glare-free illumination that does not dazzle oncoming vehicles.
VISIOTECH technology – Communicating with light
With the new VISIOTECH projection technology, HELLA allows you to
communicate using light by projecting various symbols and illuminations
onto the ground.
This warns other vehicles or pedestrians of an oncoming vehicle. The
lines projected in front of the vehicle can also be used for easier vehicle
navigation. Projecting symbols can also easily and safely mark work
areas. This results in increased safety and convenience during the daily
work routine.
Using products with VISIOTECH technology is permitted for applications
outside the StVZO (German Road Traffic Regulations). Special approvals
are required for special applications on the road.
Video clip – ZEROGLARE
Scan, watch and find out more.
Glare-free ZEROGLARE illumination
VISIOTECH technology application examples
Compare traditional illumination (left) with ZEROGLARE illumination (right)
WORK LIGHTS12
WORK LIGHTS
Close-range illumination
Long-range illumination
This LED product has the following features:
Ultra Beam LED Gen. 2
Light output (measured): 4,000 lumens, power requirement: 56 watts, colour
temperature: 6,500 kelvins, multi voltage, polarity reversal protection, overvoltage
protection, thermal management, IP 6K9K / IP 6K8 (resistant to high-pressure
cleaning/ submersible), ECE-R10 approved, high-quality aluminium housing,
ADR / GGVSEB on request, DEUTSCH connector*.
Close-range illumination
Upright or pendant mounting 1GA 995 606-001
Heavy-duty surrounding bracket 1GA 995 606-071
Long-range illumination
Upright or pendant mounting 1GA 995 606-011
Heavy-duty surrounding bracket 1GA 995 606-081
ZEROGLARE illumination
Upright mounting (available from November 2018) 1GA 995 606-171
* Recommended accessories:
2,000 mm cable with DEUTSCH connector and open
cable ends
8KB 990 299-011
ZEROGLARE

1) The ZEROGLARE variants boast illumination with special lens optics. The ZEROGLARE system ensures that drivers in oncoming vehicles are not dazzled.
The cut-off line is very sharp and the light of the ZEROGLARE headlamp is directed specifically at the area in front of the vehicle.
Video clip – ZEROGLARE
Scan, watch and find out more.
Close-range illumination
Long-range illumination
Ultra Beam LED Gen. 1
Light output (measured): 2,200 lumens, power requirement: 30 watts, colour
temperature: 6,500 kelvins, multi voltage, polarity reversal protection, overvoltage
protection, thermal management, IP 6K9K / IP 6K8 (resistant to high-pressure
cleaning/ submersible), ECE-R10 approved, high-quality aluminium housing,
DEUTSCH connector*, ADR/GGVS tested.
Close-range illumination
Upright mounting 1GA 995 506-001
Pendant mounting 1GA 995 506-011
Heavy-duty surrounding bracket 1GA 995 506-081
Long-range illumination
Upright or pendant mounting 1GA 995 506-031
* Recommended accessories:
2,000 mm cable with DEUTSCH connector and open
cable ends
8KB 990 299-011
This LED product has the following features:
13
WORK LIGHTS
Close-range illumination
Long-range illumination
Power Beam 1000 compact
Light output (measured): 1,000 lumens, power requirement: 12 watts, colour
temperature: 6,500 kelvins, multi voltage, polarity reversal protection, overvoltage
protection, thermal management, IP 6K9K / IP 6K8 (resistant to high-pressure
cleaning/ submersible), ECE-R10 approved, plastic housing, ADR / GGVS tested,
upright/pendant mounting, total corrosion protection thanks to innovative plastic
housing, DEUTSCH connector*.
Close-range illumination 1GA 996 188-501
Long-range illumination 1GA 996 188-511
Reversing lights 2ZR 996 188-521
* Recommended accessories:
2,000 mm cable with DEUTSCH connector and open
cable ends
8KB 990 299-011
This LED product has the following features:
Close-range illumination
Long-range illumination
Power Beam 1800 compact
Light output (measured): 1,850 lumens, power requirement: 26 watts, colour
temperature: 6,500°kelvins, multi voltage, polarity reversal protection, overvoltage
protection, thermal management, IP 6K9K / IP 6K8 (resistant to high-pressure
cleaning/submersible), ECE-R10 approved, heat-conducting plastic housing, total
corrosion protection thanks to innovative plastic housing, DEUTSCH connector*.
Close-range illumination 1GA 996 488-001
Long-range illumination 1GA 996 488-011
* Recommended accessories:
2,000 mm cable with DEUTSCH connector and open
cable ends
8KB 990 299-011
This LED product has the following features:
14
WORK LIGHTS
This LED product has the following features:
Q90 LED compact
Light output (measured): 1,200 lumens, power requirement: 15 watts, colour
temperature: 6,500°kelvins, multi voltage, polarity reversal protection, overvoltage
protection, thermal management, IP 6K9K / IP 6K7 (resistant to high-pressure
cleaning/submersible), ECE-R10 approved, upright/pendant mounting, total
corrosion protection thanks to innovative plastic housing.
Close-range illumination
500 mm cable with open cable ends 1GA 996 284-001
150 mm cable and DEUTSCH connector,
ADR / GGVSEB tested
1GA 996 284-081
Long-range illumination
500 mm cable with open cable ends 1GA 996 284-011
150 mm cable and DEUTSCH connector,
ADR / GGVSEB tested
1GA 996 284-091
This LED product has the following features:
Oval 100 LED compact
Light output (measured): 1,850 lumens, power requirement: 26 watts, colour
temperature: 6,500°kelvins, multi voltage, polarity reversal protection, overvoltage
protection, thermal management, IP 6K9K / IP 6K8 (resistant to high-pressure
cleaning/submersible), ECE-R10 approved, total corrosion protection thanks to
innovative plastic housing, DEUTSCH connector*.
Close-range illumination
Upright or pendant mounting 1GA 996 761-101
Side hinge 1GA 996 761-171
Long-range illumination
Upright or pendant mounting, without hinge 1GA 996 761-111
Side hinge 1GA 996 761-191
* Recommended accessories:
2,000 mm cable with DEUTSCH connector and open
cable ends
8KB 990 299-011
Close-range illumination Long-range illumination
Close-range illumination
Long-range illumination
For side mounting
For upright mounting
15
Close-range illumination Long-range illumination
Module 70 LED Gen. 4
Light output (measured): 2,500 lumens, power requirement: 30 watts, colour
temperature: 6,500°kelvins, multi voltage, polarity reversal protection, overvoltage
protection, thermal management, IP 6K9K / IP 6K8 (resistant to high pressure
cleaning/ submersible), ECE-R10 approved, high-quality aluminium housing,
upright/pendant mounting.
Close-range illumination
2,000 mm cable 1G0 996 476-001
Flush mounting 1G0 996 476-121
Long-range illumination
2,000 mm cable 1G0 996 476-011
Flush mounting 1G0 996 476-041
Extra wide ground illumination
2,000 mm cable 1G0 996 476-031
Flush mounting 1G0 996 476-131
This LED product has the following features:
Mounting
Flush mounting
Module 90 LED
Light output (measured): 3,400 lumens, power requirement: 36 watts, colour
temperature: 6,500°kelvins, multi voltage, polarity reversal protection, overvoltage
protection, thermal management, IP 6K9K / IP 6K7 (resistant to high-pressure
cleaning/ submersible), ECE-R10 approved, high-quality aluminium housing,
upright/pendant mounting, DEUTSCH connector*.
Close-range illumination 1G0 996 263-031
Long-range illumination 1G0 996 263-051
* Recommended accessories:
2,000 mm cable with DEUTSCH connector and open
cable ends
8KB 990 299-011
This LED product has the following features:
WORK LIGHTS
Close-range illumination Long-range illumination
16
Close-range illumination Long-range illumination
Modul 70 LED - Handheld headlamp with handle and switch
With these variants of the Module 70 LED series, HELLA is introducing compact,
handheld headlamps onto the market, boasting a very powerful light output. The
handheld headlamps can be used flexibly thanks to the practical handle. In addition
to a switch for continuous operation, the handle also has a touch switch for short-
term operation, enabling Morse code. Thanks to their low energy consumption,
the Module 70 handheld headlamps are ideal for use on battery-powered vehicles.
The headlamp's multi-voltage electronics enable it to be used on vehicles with 12
and 24 volt vehicle electric system voltages. Thanks to CoroSafe technology, the
Module 70 LED handheld headlamps are optimally protected against corrosion. The
work lights' aluminium housing is also treated with special chemical processes so
that they can even withstand the toughest conditions.
Colour temperature: 6,500 kelvins, multi voltage 9 -32 volts, polarity reversal
protection, overvoltage protection, thermal management, IP 6K9K / IP 6K7
(resistant to high-pressure cleaning/ submersible), ECE-R10 approved, DEUTSCH
connector.
Long-range illumination, 2,500 lumens, 30 watts 1H0 996 476-501
Close-range illumination, 2,500 lumens, 30 watts 1H0 996 476-511
Extra-wide illumination, 800 lumens, 13 watts 1H0 996 376-491
This LED product has the following features:
Mounting
Module 70 LED Gen. 3.2
Light output (measured): 1,800 lumens, power requirement: 20 watts, colour
temperature: 6,500°kelvins, multi voltage, polarity reversal protection, overvoltage
protection, thermal management, IP 6K9K / IP 6K8 (resistant to high-pressure
cleaning/submersible), ECE-R10 approved, high-quality aluminium housing.
Close-range illumination
2,000 mm cable with open cable ends 1G0 996 576-031
DEUTSCH connector* 1G0 996 576-041
Long-range illumination
2,000 mm cable with open cable ends 1G0 996 576-001
DEUTSCH connector* 1G0 996 576-011
This LED product has the following features:
WORK LIGHTS
Module 70 LED handheld headlamp with
handle and switch comprising 3 high-
power LEDs as a version with long-range
illumination or close-range illumination
Module 70 handheld headlamp with handle
and switch comprising 4 high-power LEDs
for extra-wide illumination
Close-range illumination
Long-range illumination
Extra long-range illumination
17
Module 70 LED blue
The Module 70 LED blue was specially developed for sprayers and snow ploughs.
Less glare when illuminating spray mist, road salt or snow. In addition, the blue
lens improves the perception of contrast at night.
Light output (measured): 800 lumens, power requirement: 13 watts, colour
temperature: 5,000 kelvins, multi voltage 9-32 volts, polarity reversal protection,
overvoltage protection, thermal management, IP 6K9K / IP 6K7 (resistant to high-
pressure cleaning/submersible), ECE-R10 approved, DEUTSCH connector*.
Long-range illumination,
recommended tilt angle 5°
1G0 996 276-701
* Recommended accessories:
2,000 mm cable with DEUTSCH connector and open
cable ends
8KB 990 299-011
This LED product has the following features:
WORK LIGHTS
Application example
Module 70 with magnetic base and spiral cable
This variant of the Module 70 work light is suited to a wide range of applications
thanks to its magnetic base and cigarette lighter. The magnet base enables flexible
positioning on all magnetic surfaces and quick and simple mounting and removal.
The spiral cable connection also allows optimum storage of the work light in the
glove compartment.
Light output (measured): 800 lumens, power requirement: 13 watts, colour
temperature: 6,500 kelvins, multi voltage 9-32 volts, polarity reversal protection,
overvoltage protection, thermal management, IP 6K9K / IP 6K7 (resistant to high-
pressure cleaning/submersible), ECE-R10 approved, spiral cable with cigarette
lighter.
Close-range illumination 1G0 996 376-631
This LED product has the following features:
Close-range illumination
18
Module 50 LED
Light output (measured): 800 lumens, power requirement: 15 watts, colour
temperature: 6,500 kelvins, multi voltage 9-50 volts, polarity reversal protection,
overvoltage protection, thermal management, IP 6K9K / IP 6K8 (resistant to high-
pressure cleaning/ submersible), ECE-R10 approved, high-quality aluminium
housing, ADR/GGVS tested, DEUTSCH connector*.
Close-range illumination
Upright mounting 1G0 995 050-001
Pendant mounting 1G0 995 050-011
Long-range illumination
Upright or pendant mounting 1G0 995 050-021
* Recommended accessories:
2,000 mm cable with DEUTSCH connector and open
cable ends
8KB 990 299-011
This LED product has the following features:
WORK LIGHTS
166
150
106
75
Mounting
Flush mounting
Oval 100 LED Gen. 2
Light output (measured): 4,400 lumens, power requirement: 56 watts, colour
temperature: 6,500 kelvins, multi voltage, polarity reversal protection, overvoltage
protection, thermal management, IP 6K9K / IP 6K8 (resistant to high-pressure
cleaning/ submersible), ECE-R10 approved, high-quality aluminium housing,
ADR / GGVSEB on request, DEUTSCH connector*.
Close-range illumination
Upright or pendant mounting 1GA 996 761-001
Flush mounting 1GA 996 761-021
Long-range illumination
Upright or pendant mounting 1GA 996 761-011
* Recommended accessories:
2,000 mm cable with DEUTSCH connector and open
cable ends
8KB 990 299-011
This LED product has the following features:
Close-range illumination Long-range illumination
Close-range illumination
Long-range illumination
19
Flat Beam 500
Light output (measured): 550 lumens, power requirement: 7 watts, colour
temperature: 6,500°kelvins, multi voltage, polarity reversal protection, overvoltage
protection, thermal management, IP 6K9K / IP 6K7 (resistant to high-pressure
cleaning/submersible), ECE-R10 approved, impact-resistant plastic housing,
2,000 mm cable with open cable ends.
Standard 45° downward illumination: the special lens optics enable perfect light
projection into the work area, even with vertical mounting. The structure refracts
the light downwards at a 45° angle and therefore provides good illumination in the
direct near field area.
Close-range illumination
Upright mounting, standard bracket 1GA 995 193-001
Pendant mounting, standard bracket 1GA 995 193-011
Upright mounting, wall-mounted 1GA 995 193-021
Upright mounting, strap fixing 1GA 995 193-031
Upright mounting, surrounding bracket 1GA 995 193-041
This LED product has the following features:
WORK LIGHTS
Flat Beam 1000
Light output (measured): 1,100 lumens, power requirement: 11 watts, colour
temperature: 6,500°kelvins, multi voltage, polarity reversal protection, overvoltage
protection, thermal management, IP 6K9K / IP 6K7 (resistant to high-pressure
cleaning/submersible), ECE-R10 approved, impact-resistant plastic housing.
Upright mounting, 2,000 mm cable with open cable ends.
Close-range illumination
Wall-mounted 1GD 996 193-001
Surrounding bracket 1GD 996 193-011
45° illumination
The special lens optics enable perfect light projection into work area, even with
vertical mounting. The structure refracts the light downwards at a 45° angle and
therefore provides good illumination in the direct near field area.
Wall-mounted 1GD 996 193-051
This LED product has the following features:
Close-range illumination
Close-range illumination
20
Close-range illumination
LED Lightbar 350
Light output (measured): 2,200 lumens, power requirement: 25 watts, colour
temperature: 5,000 kelvins, multi voltage, polarity reversal protection, overvoltage
protection, thermal management, IP 6K9K / IP 6K7 (resistant to high-pressure
cleaning/submersible), ECE-R10 approved, Thermo Pro plastic housing.
Close-range illumination
2,500 mm cable with open cable ends 1GJ 958 040-501
This LED product has the following features:
WORK LIGHTS 21
HELLA VALUEFIT.
PROVEN QUALITY. GOOD PRICE.
Especially oriented toward the specific requirements
on the independent aftermarket, the work lights
of the HELLA VALUEFIT range provide the optimal
mix of reliable quality, excellent performance and
competitive pricing.
All HELLA VALUEFIT headlamps meet the relevant
technical specifications, are safe and reliable, and
enable cost-effective repairs. What's more, there is no
need to go without important services.
IN GOOD SHAPE
FOR A STRONG PERFORMANCE
The HELLA VALUEFIT work lights are not only
impressive because of their variety of shapes but also
because of their light output. Equipped consistently
with energy-efficient, bright LED technology, the work
lights with up to 5,500 lumens provide outstanding
workplace illumination.
Whether you opt for the round or square
housing shape, or the extra-flat light bar, the
robust HELLA VALUEFIT headlamps are the
ideal partner for many fields of application in
agricultural and construction machinery as well
as in trucks and trailers.
This LED product has the following features:
Close-range illumination
R900 LED
Light output (measured): 900 lumens, power requirement: 9 watts, protection
class: IP 67 and IP 6K9K, aluminium housing, multi voltage: 10-30 volts, polarity
reversal protection, ECE-R10 approved.
Close-range illumination – upright and pendant mounting
800 mm cable with open cable ends 1G0 357 108-012
133
107
41,5
WORK LIGHTS
S800 LED
Light output (measured): 800 lumens, power requirement: 9 watts, protection
class: IP 67 and IP 6K9K, aluminium housing, multi voltage: 10-30 volts, polarity
reversal protection, ECE-R10 approved and ECE-R23 reversing light approved.
Close-range illumination – upright and pendant mounting
800 mm cable with open cable ends 1GA 357 107-012
3,000 mm cable with open cable ends 1GA 357 107-022
129
100 40
Close-range illumination
This LED product has the following features:
24
This LED product has the following features:
This LED product has the following features:
Close-range illumination
S1500 LED
Light output (measured): 1,500 lumens, power requirement: 15 watts, protection
class: IP 67 and IP 6K9K, aluminium housing, multi voltage: 10-30 volts, polarity
reversal protection, ECE-R10 approved.
Close-range illumination – upright and pendant mounting
ECE-R23 reversing light approved
800 mm cable with open cable ends 1GA 357 103-012
3,000 mm cable with open cable ends 1GA 357 103-022
With handle and switch, close-range illumination –
upright and pendant mounting
ECE-R23 reversing light approved
DEUTSCH connector 1GA 357 103-082
129
100 40
WORK LIGHTS
R1500 LED
Light output (measured): 1,500 lumens, power requirement: 15 watts, protection
class: IP 67 and IP 6K9K, aluminium housing, multi voltage: 10-30 volts, polarity
reversal protection, ECE-R10 approved.
Close-range illumination – upright and pendant mounting
800 mm cable with open cable ends 1G0 357 101-012
133
107 41,5
Close-range illumination
25
This LED product has the following features:
This LED product has the following features:
Close-range illumination
137
108
48
S2500
Light output (measured): 2,500 lumens, power requirement: 25 watts, protection
class: IP 67 and IP 6K9K, aluminium housing, multi voltage: 10-30 volts, polarity
reversal protection, ECE-R10 approved.
Close-range illumination – upright and pendant mounting
ECE-R23 reversing light approved
800 mm cable with open cable ends 1GA 357 106-022
3,000 mm cable with open cable ends 1GA 357 106-032
137
114
41,5
R2200
Light output (measured): 2,200 lumens, power requirement: 25 watts, protection
class: IP 67 and IP 6K9K, aluminium housing, multi voltage: 10-30 volts, polarity
reversal protection, ECE-R10 approved.
Close-range illumination – upright and pendant mounting
800 mm cable with open cable ends 1G1 357 105-022
Close-range illumination
WORK LIGHTS26
This LED product has the following features:
WORK LIGHTS
S3000 LED
Light output (measured): 3,000 lumens, power requirement: 31 watts, protection
type: IP 67 and IP 6K9K, aluminium housing, multi voltage: 10-52 volts, polarity
reversal protection, ECE-R10 approved, 800 mm cable.
Large area off-road lighting
800 mm cable, DEUTSCH connector included 1GA 357 109-002
Close-range illumination
LBX LED-Lightbars
Light output (measured): up to 5,500 lumens, 9-32 volts, polarity reversal
protection, overvoltage protection, IP 67 and IP 6K9K, ECE-R10 approved,
aluminium housing, DEUTSCH connector*, upright/pendant mounting.
Close-range illumination
LBX-220 LED, 1,000 lumens, 22 watts 1GE 360 000-002
LBX-380 LED, 2,000 lumens, 44 watts 1GJ 360 001-002
Long-range illumination
LBX-540 LED, 3,500 lumens, 66 watts 1GJ 360 002-002
LBX-720 LED, 5,500 lumens, 88 watts 1GJ 360 003-002
* Recommended accessories:
2,000 mm cable with DEUTSCH connector and open
cable ends
8KB 990 299-011
LBX-220 LED
LBX-380 LED
LBX-540 LED
LBX-720 LED
80
98
M8
80
98
M8
80
98
M8
80
98
M8
min 739 - max 759
704
min 574 - max 594
539
min 409 - max 429
374
min 244 - max 264
209
Close-range illumination Long-range illumination
LBX-220 LED LBX-540 LED
LBX-380 LED LBX-720 LED
This LED product has the following features:
27
WORK LIGHTS
HELLA VISIOTECH PROJECTION TECHNOLOGY
With the new VISIOTECH projection technology, HELLA allows you to communicate using light by projecting various symbols and
illuminations onto the ground. This results in increased safety and convenience during the daily work routine.
With the SL60 warning lamp, a special lens optic focuses the LED's light beams so much that a stripe-shaped warning line is
projected onto the ground. Depending on the mounting, the warning line can be projected horizontally or vertically in front of the
vehicle. This application warns other vehicles or pedestrians of an oncoming vehicle. The projected lines in front of the vehicle can
also be used for easier vehicle navigation.
In both cases, occupational safety and comfort are significantly increased and accidents can be prevented in advance.
Models of the SL60 LED warning lamp are available with a red or blue projection line, making it suitable for the most diverse kinds
of applications.
Application examples
Module 50 LED Spot
Power requirement: 15 watts, multi voltage 9 - 52 volts, polarity reversal protection,
overvoltage protection, thermal management, IP 6K9K / IP 6K8 (resistant to high-
pressure cleaning/ submersible), ECE-R10 approved, high-quality aluminium
housing, ADR/GGVS tested, DEUTSCH connector*.
The Module 50 LED spot series by HELLA greatly contributes to workplace safety.
These headlamps feature a special lens technology that focuses the light so
strongly that a circular warning point is projected onto the ground. Depending on
the surface, the colours white, blue, green or red are preferable.
White 1G0 995 050-051
Blue 1G0 995 050-061
Green 1G0 995 050-071
Red 1G0 995 050-081
* Recommended accessories:
2,000 mm cable with DEUTSCH connector and open
cable ends
8KB 990 299-011
This LED product has the following features:
28
WORK LIGHTS
SL60 LED
Compact warning lamp. A special lens optic focuses the LED's light beams so
much that a stripe-shaped warning line is projected onto the ground. This alerts
other vehicles and pedestrians. The lines can also be used for easier vehicle
navigation.
Power requirement: 8 watts, multi voltage: 10-80 volts, ECE-R10 approval,
IP 67 and IP 6K9K connection: 1,000 mm cable with open cable ends.
Illumination
Blue 1G0 996 210-001
Red 1G0 996 210-011
This LED product has the following features:
6370
M8 35
77
99
Application examples
The Module 50 LED spot warning lamp projects a circular warning point onto the ground. Here, too, a special lens optic focuses the
LED light so much that a circular warning spot is projected onto the ground. This application is suitable for a wide range of
applications (e.g. forklift). Thanks to its compact dimensions, the Module 50 LED spot is particularly well-suited when there is little
space available for installation. The headlamp serves primarily as a warning lamp to visually warn other vehicles or pedestrians of
an approaching vehicle, but can also be used to visually mark certain areas. The Module 50 LED spot warning lamp is available in
blue, green, red and white.
Using the SL60 LED and Module 50 LED spot warning lamp is permitted for applications outside the StVZO. Special approvals are
required for special applications on the road.
29
REVERSING LIGHTS
Module 70 LED reversing light
800 lumens, power requirement: 13 watts, colour temperature: 6,500 kelvins,
extra-wide close-range illumination, IP 6K9K/IP 6K7 (resistant to high-pressure
cleaning/submersible), upright/pendant mounting, high-quality aluminium
housing with CoroSafe coating, ECE-R10 and ECE-R23 approved.
2,000 mm cable with open cable ends 2ZR 996 376-091
This LED product has the following features:
Power Beam 1000 compact reversing light
Light output (measured): 1,000 lumens, power requirement: 12 watts, colour
temperature:
6,500 kelvins, multi voltage, polarity reversal protection, overvoltage protection,
thermal management, IP 6K9K/IP 6K8 (resistant to high-pressure cleaning/
submersible), ECE-R10 and ECE-R23 approved, plastic housing, ADR/GGVS tested,
upright/pendant mounting, DEUTSCH connector*.
DEUTSCH connector 2ZR 996 188-521
* Recommended accessories:
2,000 mm cable with DEUTSCH connector and open
cable ends
8KB 990 299-011
This LED product has the following features:
Close-range illumination
Close-range illumination
30
REVERSING LIGHTS
This LED product has the following features:
Q90 compact LED reversing light
1,000 lumens, power requirement: 15 watts, colour temperature: 5,000°kelvins, IP
6K9K/ IP 6K7 (resistant to high-pressure cleaning/submersible), heat-conducting
plastic housing, total corrosion protection thanks to innovative plastic housing,
upright/pendant mounting, ECE-R10- and ECE-R23 approved.
2,000 mm cable with open cable ends 2ZR 996 284-501
500 mm cable and DEUTSCH connector,
ADR / GGVSEB tested
2ZR 996 284-511
Repulse Pro reversing light
870 lumens, power requirement: 11 watts, colour temperature: 5,500°kelvins, IP
6K9K/ IP 6K7 (resistant to high-pressure cleaning/submersible), heat-conducting
plastic housing, total corrosion protection thanks to Thermo Pro technology,
upright/pendant mounting, ECE-R10 and ECE-R23 approved.
AMP-SUPERSEAL connector (2-pin)
with 2,000 mm cable with open cable ends
2ZR 012 456-201
EasyConn connector (2-pin) with 1,000 mm cable with
open cable ends
2ZR 012 456-211
6.3 mm flat receptacles with 3,500 mm cable with open
cable ends
2ZR 012 456-221
This LED product has the following features:
Close-range illumination
Close-range illumination
31
Accessories
Product photo Description Part number
Bracket
Pipe-socket mounting bracket
For combination with 8HG 002 365-001 socket pipe. Suitable for mounting with 42 mm
bracket width. Electrical contacting within the pipe socket via socket according to DIN 7 2 591.
With AMP plug connection or grommet
Model series:
Halogen: Ultra Beam, Mega Beam and Oval 100
8HG 990 320-001
With DEUTSCH connector or grommet
Model series:
LED: Ultra Beam, Oval 100, Power Beam and Module 90
Halogen: Ultra Beam
8HG 990 320-011
Mirror bracket attachment
Rotatable universal bracket for mounting on tubes/pipes (diameter: 15-25 mm).
For replacement on work lights with 36 mm or 42 mm bracket width.
36 mm bracket width
Model series: Oval 90, Module 70 and Flat Beam 500
8HG 990 263-111
42 mm bracket width
Model series: Ultra Beam, Mega Beam, Oval 100, Power Beam, Module 90, Q90 LED
and AP 1200 LED
8HG 990 263-131
Magnetic mounting bracket
For work lights with U-bracket. Includes 2 x magnets and fastening materials.
Model series: All work lights with standard bracket
8HG 004 806-001
Four-point mounting
Made of amber chrome-plated steel
Model series: All work lights with standard bracket
9XD 990 298-001
Four-point mounting
Made of stainless steel with oblong holes
Model series: All work lights with standard bracket
9XS 130 261-001
Angle bracket
Angle attachment for work lights with 42 mm bracket width
Model series: Ultra Beam, Mega Beam, Oval 100, Power Beam, Module 90, Q90 LED
and AP 1200 LED
9XD 990 298-031
Plastic bracket
Glass-fibre-reinforced standard bracket for work lights
Model series: Ultra Beam, Mega Beam, Oval 100, Power Beam, Module 90, Q90 LED
and AP 1200 LED
42 mm bracket width 8HG 332 912-002
Standard bracket
With extra space to the rear
Model series: Ultra Beam, Mega Beam, Oval 100, Power Beam, Module 90, Q90 LED
and AP 1200 LED
42 mm bracket width 8HG 992 377-042
Oblong hole bracket
Special bracket with oblong hole for mounting
Model series: Oval 90, Module 70 and Flat Beam 500
36 mm bracket width 8HG 331 414-372
Forked bracket
Special bracket for flat mounting
Model series: Oval 90, Module 70 and Flat Beam 500
36 mm bracket width 8HG 994 412-372
Standard bracket with eyelet
Standard bracket for extensions with restricted space to the rear
Model series: Ultra Beam, Mega Beam, Oval 100, Double Beam, AS 200, Power Beam,
Module 90, Q90 LED and AP 1200 LED
42 mm bracket width 8HG 994 974-002
REVERSING LIGHTS32
Accessories
Connectors
The comprehensive range of HELLA accessories for plug connections offers solutions for virtually every area of
application. Unwanted failures are often caused by faulty wiring and not by the products themselves. With the help
of the HELLA SUPERSEAL range, a water- and dustproof connection of the cable ends is achieved. This, in turn,
offers the best working conditions in all weathers.
DEUTSCH connector set, 2-pin 8JA 201 022-801
DEUTSCH connector set, 6-pin 8JA 201 022-831
AMP connector set (consisting of AMP connector and installation
sleeves)
8JD 990 295-037
HB3 connector (10x) 8JA 990 295-217
H9 connector (20x) 8JD 158 175-807
SUPERSEAL, assortment case, consisting of various SUPERSEAL plug
housings, pin/socket contacts, single conductor seals and dummy
plugs (780 parts)
8JA 009 256-801
Cables
HELLA offers numerous adapter cables as accessories for uncomplicated commissioning
of the headlamps.
2,000 mm cable with AMP connector and open cable ends 8KB 990 299-001
2,000 mm cable with DEUTSCH connector and open cable ends 8KB 990 299-011
2,000 mm cable with H9 connector and open cable ends
and rubber cap
8KB 990 299-311
2,000 mm cable with HB3 connector and open cable ends 8KB 990 299-331
200 mm adapter cable from DEUTSCH to AMP connector 8KB 990 299-361
230-volt power supply (suitable for headlamps up to max. 45 watts) 8EN 332 584-001
REVERSING LIGHTS 33
HELLA BEACONS
Play it safe - with beacons from HELLA!
Whenever a special optical warning against dangerous situations is required, beacons are in the limelight. This is not
restricted to rescue missions but is also the case during assignments with large, heavy and/or slow vehicles, such as
harvesters or heavy-duty transporters. The HELLA beacons have a strong warning effect and tell other road users:
please be careful, work is being carried out around the vehicle. Therefore, our beacons do their part in providing greater
safety. This safety is also achieved thanks to the optimal light focus and distribution, the resulting long range and the
very high luminous intensity of the applied LED technology.
HELLA is also constantly working on the development of new, innovative solutions in the beacon sector, which open up
new possibilities for both the warning effect and the design. One example is the use of EdgeLight technology in the new
K-LED Rebelution. Here, a special light guide ensures a particularly clear signature through a light-emitting edge. This
gives an impressive appearance and a particularly striking and clearly perceptible light image.
In addition, HELLA beacons are characterised by outstanding quality in terms of workmanship and stability – as proven
by their long service life.
Do not leave safety to chance – put your trust in HELLA beacons.
BEACONS
This LED product has the following features:
149 ±1
60.7 ±1.5
Flashing
Rotating
KLED REBELUTION
Maximum performance with minimalist design: The futuristic K-LED Rebelution
in patented LED technology is a real innovation in the field of warning lamps, and
revolutionises the beacon market from both a visual and technical perspective. The
beacon does not require a classic dome and instead has a circumferential, ring-
shaped light band. Despite the minimal light exit area, the beacon emits a clearly
visible warning signal and complies with European Directive ECE-R65 for use on
public roads. Further advantages are protection against water and dust, as well as
outstanding electromagnetic compatibility (EMC).
K-LED Rebelution F, flashing, amber 2XD 455 255-001
K-LED Rebelution F, rotating, amber 2RL 455 256-001
Type approval: ECE-R10, ECE-R65
24h
Long
Life
35
This LED product has the following features:
KL 7000 LED
The KL 7000 LED is the logical development of the widely used KL-700 and KL-
7000 series. The beacon is characterised by its flat and compact design, long
service life, and a high degree of efficiency in converting electric power into light.
It makes it easy to change from halogen to LED.
Fixed, rotating 2RL 011 484-001
Pipe socket, rotating 2RL 011 484-011
Magnet, rotating 2RL 011 484-021
Solid, flashing 2XD 012 972-001
Pipe socket, flashing 2XD 012 972-011
Magnet, flashing 2XD 012 972-021
Type approval: ECE-R10, ECE-R65, SAE J845 class 2
165±0.5
193.9±5
75
ø3
0
165
118.9
Pipe-socket mounting
Fixed attachment
131.2
ø165
BEACONS
This LED product has the following features:
ROTA LED COMPACT
The Rota LED Compact is the LED successor of the existing halogen beacon series
Rotafix, Rotaflex and Rota Compact. These can be replaced 1:1. No moving parts
are required for the LED functions – no wear and tear and maximum reliability.
Since LEDs are maintenance-free, they do not have any additional costs for spare
parts or maintenance. Downtimes are reduced to a minimum. The beacon is
available in three different mounting variants. Flexible base protects from branch
impact: the beacon bends and always returns to its original position.
Fixed, rotating 2RL 014 979-001
Pipe socket Flex, rotating 2RL 014 979-011
Magnet, rotating 2RL 014 979-021
Solid, flashing 2XD 013 979-001
Pipe socket Flex , flashing 2XD 013 979-011
Magnet, flashing 2XD 013 979-021
Type approval: ECE-R10, ECE-R65, SAE J845 class 2,
SAE J845 class 1 - version available on request
Magnetic attachment
Magnetic attachment
Fixed attachment
84,8 ±0,5
Ø165,2 ±1
Ø138,8 ±1
118 ±1
Ø5,5 (3x)
Ø150 ±0,5
Ø5,5 (3x)
Ø10 min
Ø130 ±0,5
20°
120° (3x)
120° (3x)
Pipe socket mounting Flex
118 ±1
164 ±1
165 ±1
84,8 ±0,5
Ø165 ±1
Ø138,8 ±0,5
130 ±1
36
BEACONS
ROTA LED
The Rota LED with rotating or flashing LED light function is a convincing offering
with its high efficiency, flat and compact design. Due to the shock absorbing
rubber foot, it is highly resilient to vibration and thus perfectly suited to challenging
applications.
Fixed, rotating 2RL 010 979-001
Pipe socket Flex, rotating 2RL 010 979-011
Magnet, rotating 2RL 010 979-021
Solid, flashing 2XD 012 878-001
Pipe socket Flex, flashing 2XD 012 878-011
Magnet, flashing 2XD 012 878-021
Type approval: ECE-R10, ECE-R65, SAE J845 class 2
This LED product has the following features:
ø55
ø135
29
55 46
183
132
135
124.1
42.5
ø130
ø3.5
R73.5
132
126.1
44.5
42.5
135
R50.5
R73.5
Magnetic attachment
Pipe socket mounting Flex
Fixed attachment
37
BEACONS
This LED product has the following features:
KLED BLIZZARD
The K-LED Blizzard is the successor generation to the popular and widely used
K-LED FO. These can be replaced 1:1. The new generation combines its
predecessor's popular design with the latest LED technology. Alongside functional
control, this beacon boasts the option of synchronising up to four beacons with
one another. The beacon is available in three different mounting variants and has a
flashing light function.
Solid, flashing 2XD 012 980-001
Pipe socket Flex, flashing 2XD 012 980-011
Magnet, flashing 2XD 012 980-021
Type approval: ECE-R10, ECE-R65, SAE J845 class 2
Magnetic attachment
Pipe socket mounting Flex
Fixed attachment
Ø 4,1 (3X)
Ø 130
120° (3X)
20°
83,6 ±1
132 ±1,5
149 ±1
83,6 ±1,5
95,5 ±1,5
148,3 ±1
39
±1
88 ±1,5
KLED 1.2
The K-LED 1.2 is the innovative addition to the K-LED family. It is available as a
rotating or flashing variant. The double lighting system in the K-LED 1.2 ensures a
larger light exit area and thus a particularly large warning effect. No moving parts
are required for the K-LED 1.2 either - there is no need to replace wearing parts.
The beacon is therefore characterised by a long service life. The impact-resistant
dome made of polycarbonate guarantees particularly reliable protection against
impacts (e.g. from branches). The radio signals are not disturbed by the K-LED 1.2
as it has a high EMC resistance.
Fixed, rotating 2RL 012 983-301
Pipe socket, rotating 2RL 012 983-401
Solid, flashing 2XD 012 984-301
Pipe socket, flashing 2XD 012 984-401
Type approval: ECE-R10, ECE-R65, SAE J845 class 2
This LED product has the following features:
1600 ±10
21
Ø146 ±0,5
85 ±1
115,5 ±1,5
123 ±1,5
Ø6 ±0,1
Ø164,7 ±1
Ø169,3 ±1
Ø6
120° (x3
)
Ø150
±0,5
Ø130
±0,5
20
°
42,8°
Fixed attachment
Ø 169,5 ±0,5
196,5 ±1
146 ±1
115,5 ±1,5
85 ±1
125,5 ±1,5
Pipe-socket mounting
38
BEACONS
K-LED 2.0
The K-LED 2.0 is the first HELLA beacon with a choice between a rotating or
flashing warning signal. The integrated light sensor automatically toggles between
day and night mode. This guarantees the best possible warning effectiveness.
Extremely flat design and impact-resistant dome. Radio signals are not disturbed
by the K-LED 2.0.
Fixed attachment, with silver-coloured base plate 2XD 011 557-101
Fixed attachment, with black base plate 2XD 011 557-841
Pipe socket, with silver-coloured base plate 2XD 011 557-201
Pipe socket, with black base plate 2XD 011 557-811
Magnet, with silver-coloured base plate 2XD 011 557-301
Type approval: ECE-R65, ECE-R10, SAE J845 class 1
This LED product has the following features:
ø130
ø150
20º
169.3
87.6
ø165
160.6
Magnetic attachment
Pipe-socket mounting
Fixed attachment
39
BEACONS
Accessories
Product photo Description Part number VPE
Socket pipe to weld on, straight, 100 mm long,
with rubber stopper and socket according to DIN 14620
1-pin
8HG 002 365-001
2-pin
8HG 006 294-101
1
Socket pipe with screw-on base plate, total height 126 mm,
with rubber stopper and socket according to DIN 14620
1-pin
8HG 006 294-011
2-pin
On request
1
Socket pipe, angled, with lateral screw-on base plate, clearance 90 mm,
height 100 mm including rubber stopper, socket , 2 x hexagon screws
M8 x 35, 2 x hexagon nuts M8, 2 x spring washers according to DIN 14620
1-pin
8HG 006 294-021
2-pin
On request
1
Socket pipe, angled, with lateral screw-on base plate, clearance 50 mm,
height 100 mm including rubber stopper, socket , 2 x hexagon screws
M8 x 35, 2 x hexagon nuts M8, 2 x spring washers according to DIN 14620
1-pin
8HG 006 294-111
2-pin
On request
1
Socket pipe for inclined screw-on surfaces, adjustable to 90° parallel to
the carriageway, height approx. 105 mm, with rubber stopper, socket,
2 x hexagon screws M8 x 35, 2 x hexagon nuts M8, 2 x spring washers
according to DIN 14620
1-pin
8HG 006 294-031
2-pin
8HG 006 294-141
1
Socket pipe with screw attachment, height approx. 100 mm,
with rubber stopper and socket according to DIN 14620
1-pin
8HG 006 294-051
2-pin
8HG 006 294-091
1
Socket pipe with 2 screw holes for attaching it to the rear of the cab, with
telescope bracket, total height approx. 1,000 mm, can be shifted up to
700 mm, with rubber stopper and socket according to DIN 14620
1-pin
8HG 006 294-041
2-pin
On request
1
Socket pipe to weld on, straight, height 100 mm
compatible with 8HG 002 365-001 / 8HG 006 294-101
8HG 096 531-007 2
Socket pipe, straight, with screw-on base plate, total height 126 mm
compatible with 8HG 006 294-011 / -121
8HG 096 531-107 2
Socket pipe, angled, with base plate for screwing onto side,
clearance 90 mm
compatible with 8HG 006 294-021 / -221
8HG 096 531-117 2
Socket pipe, angled, with base plate for screwing onto side,
clearance 50 mm
compatible with 8HG 006 294-111 / -211
8HG 096 531-127 2
Socket pipe for inclined screw-on surfaces, adjustable to 90° parallel to the
carriageway, height approx. 105 mm
compatible with 8HG 06 294-031 / -141
8HG 096 531-137 2
40
BEACONS
Mounting examples
Socket pipe with base plate for
screwing on
Socket pipe, angled, with base plate
for screwing onto side
Socket pipe, pivotingSocket pipe with screw attachment
Product photo Description Part number VPE
2-pin socket with cover,
with 2 blade terminal connections 6.3 mm
8JB 004 777-001*
8JB 004 777-002*
5
1
2-pin socket with cover, with 300 m cable 2.5 mm2 and
2 blade terminal connections 6.3 mm
8JB 001 946-101* 1
2-pin aluminium alloy socket with cover and 1 screw connection,
ground on housing
8JB 001 946-021* 10
2-pin socket with cover and 2 blade terminal connections 6.3 mm 8JB 004 123-031* 1
1-pin round socket with oval-head screw M4 x 8 8JB 850 434-011* 10
1-pin socket outlet with cover 8JB 001 946-011* 10
12 V, control unit for monitoring the operation of the rotating beacons
and strobe-type beacons; indicates the failure of a beacon
5KG 011 630-101 1
Rubber stopper /cap according to DIN 14620
9GH 096 532-001
9GH 096 532-007
10
200
* Sockets comply with DIN ISO 4165; installation opening: Ø 18.5 mm, control panel thickness max. 7 mm.
Accessories
41
WARNING LAMPS
This LED product has the following features:
BST - FOR HORIZONTAL MOUNTING
Optimum signalling effect thanks to a combination of three power LEDs and a
high-grade precision lens. Flat and compact design. In addition to continuous light,
a total of four flash patterns (single, double, triple, quadruple flash) can be set as
synchronous or alternating signals. Power consumption: 7-14 W.
Fixed attachment
Blue (1 level), 2 units 2XD 014 561-001
Amber (1 level), 2 units 2XD 014 561-201
Red (1 level), 2 units 2XD 014 561-601
Bracket mounting
Blue (1 level), 2 units 2XD 014 561-101
Amber (1 level), 2 units 2XD 014 561-401
Red (1 level), 2 units 2XD 014 561-701
Lighting homologation standard: ECE-R65 XA1, XB1, XR1
EMC: ECE-R10, CISPR 25 class 3
K approval (§ 53a StVZO) only for versions in amber
Please observe the statutory mounting guidelines. Use only to such an extent
as is permitted by law. Mounting only to the side or to the rear.
Front mounting requires special approval from the responsible regional
authority.
BSTSLIM
Optimum signalling effect thanks to a combination of power LEDs and a
high-grade precision lens. Particularly flat and compact design
(construction height 12.8 mm).
In addition to continuous light, a total of four flash patterns (single, double, triple,
quadruple flash) can be set as synchronous or alternating signals.
Horizontal installation
With 6 LEDs, power consumption 13-17 W (day/night mode)
Blue, 2 units 2XD 014 562-001
Amber, 2 units 2XD 014 562-201
Red, 2 units 2XD 014 562-601
With 3 LEDs, power consumption 6-9 W (1 level)
Blue, 2 units 2XD 014 563-001
Amber, 2 units 2XD 014 563-201
Red, 2 units 2XD 014 563-601
Vertical installation
With 6 LEDs, power consumption 13-17 W (day/night mode)
Blue, 2 units 2XD 014 592-001
Amber, 2 units 2XD 014 592-201
Red, 2 units 2XD 014 592-601
Lighting homologation BST-Slim 3 LED: ECE-R65 XA1, XB1, XR1
Lighting homologation BST-Slim 6 LED: ECE-R65, XA2, XB2, XR2
EMC: ECE-R10, CISPR 25 class 5
K approval (§ 53a StVZO) only for versions in amber
This LED product has the following features:
132 ±0,6
2
,8 ±0,7
32 ±0,4
89,3 ±0,6
32 ±0,4
2,8 ±0,7
132 ±0,6
12,8 ±0,7
32 ±0,4
85,98 ±0,8
15,91 ±0,8
27,66 ±1
77,28 ±0,5
64.55 ±0,5
22.11 ±0,8
Fixed attachment
Bracket mounting
42
WARNING LAMPS
This LED product has the following features:
BST-V - FOR VERTICAL MOUNTING
Optimum signalling effect thanks to a combination of six power LEDs and a high-
grade precision lens. Flat and compact design. In addition to continuous light, a
total of four flash patterns (single, double, triple, quadruple flash) can be set as
synchronous or alternating signals. Power consumption: 7-14 W.
Fixed attachment
Amber (1 level), 2 units 2XD 012 160-951
Blue (1 level), 2 units 2XD 012 160-901
Bracket mounting
Amber (1 level), 2 units 2XD 012 160-961
Blue (1 level), 2 units 2XD 012 160-911
Lighting homologation standard: ECE-R65 XA1, XB1
EMC: ECE-R10, CISPR 25 class 5
K approval (§ 53a StVZO) only for versions in amber
Please observe the statutory mounting guidelines. Use only to such an extent
as is permitted by law. Mounting only to the side or to the rear.
Front mounting requires special approval from the responsible regional
authority.
Fixed attachment
119,93 ±0,5
127,45 ±0,8
27,82 ±1
17,61 ±0,8
Bracket mounting
This LED product has the following features:
BST - FOR HORIZONTAL MOUNTING
Optimum signalling effect thanks to a combination of six power LEDs and a high-
grade precision lens. Flat and compact design. In addition to continuous light, a
total of four flash patterns (single, double, triple, quadruple flash) can be set as
synchronous or alternating signals. Power consumption: 7-14 W.
Fixed attachment
Blue (day/night level), 2 units 2XD 014 560-001
Blue (1 level), 2 units 2XD 012 160-801
Amber (day/night level), 2 units 2XD 014 560-201
Amber (1 level), 2 units 2XD 012 160-851
Red (1 level), 2 units 2XD 012 160-821
Bracket mounting
Blue (day/night level), 2 units 2XD 014 560-101
Blue (1 level), 2 units 2XD 012 160-811
Amber (day/night level), 2 units 2XD 014 560-401
Amber (1 level), 2 units 2XD 012 160-861
Red (1 level), 2 units 2XD 012 160-831
Lighting homologation standard: ECE-R65 XA1, XB1, XR1,
CISPR 25 class 5
Lighting homologation day/night mode: ECE-R65 XA2, XB2,
CISPR 25 class 3
EMC: ECE-R10, CISPR 25 class 3 or 5
K approval (§ 53a StVZO) only for versions in amber
Please observe the statutory mounting guidelines. Use only to such an extent
as is permitted by law. Mounting only to the side or to the rear.
Front mounting requires special approval from the responsible regional
authority.
107,11 ±0,8
22,11 ±0,5
Bracket mounting
Fixed attachment
119,93 ±0,5
127,45 ±0,8
27,82 ±1
17,61 ±0,8
107,11 ±0,8
22,11 ±0,5
43
HELLA FRONT LIGHTING
Look ahead - with front lighting solutions from HELLA
Nothing works without powerful headlamps - neither on the road nor on the field. They are, so to speak, a vehicle's
eyes and therefore an essential safety feature when driving and working at night. The HELLA 90 mm front lighting
modules are specially designed to meet the needs of trucks and agricultural vehicles. Due to their wide range of
functions, they can be used in almost all vehicles and situations. The modules are small, but powerful. Thanks to their
modular concept, they offer a high degree of flexibility, allowing for many areas of application, particularly in trucks
and agricultural vehicles.
As a result of the future-proof HELLA upgrade concept, traditional halogen modules can also be converted at a later
date to efficient, light-intense LED technology, a feature which is already present in most of the modules.
90 mm modules
Program overview
LED Halogen
(conventional lighting technology)
Main light functions
Low beam and high beam (bi-modules)
Low beam
Low beam with daytime running light and
position light
High beam
High beam with daytime running light and
position light
High beam and direction indicator light
Low beam and high beam (bi-modules)
Low beam
High beam
High beam and position light
Auxiliary light
functions
Fog light
Fog light and cornering light
Fog light, daytime running light and position light
Daytime running light
Daytime running light and position light
Direction indicator light, daytime running light and
position light
Fog light
Fog light and cornering light
Fog light and daytime running light
Daytime running light and position light
Position light
Direction indicator light and position light
Direction indicator light
For the most diverse applications and maximum demands
Maximum design and technological freedom thanks to modular system
More illumination and safety due to innovative LED technology
Powerful, cost-efficient and modular. Put together your customised front lighting from our wide range of
90 mm modules.
www.hella.com/headlamp-modules
90 mm modules
Configurator
FRONT LIGHTING 45
LED low beam headlamp L 4060*
Module headlamp with 40 x 60 mm polycarbonate lens, robust die-cast aluminium
housing, silver-coloured design cover (black design cover on request),
multi voltage 9-32 volts.
Right-hand traffic/SAE version, FEP connector 1BL 012 488-001
Left-hand traffic, FEP connector 1ML 012 488-011
Right-hand traffic/ SAE-Version, DEUTSCH connector 1BL 012 488-101
Left-hand traffic, DEUTSCH connector 1ML 012 488-111
Type approval: ECE-R112, ECE-R10, 1BL 012 488-001:
3831,
1ML 012 488-011: 4090, 1BL 012 488-101: 3881,
1ML 012 488-11: 4090
LED low beam headlamp L 4060 with daytime running light/ position light*
Module headlamp with 40 x 60 mm polycarbonate lens, robust die-cast aluminium
housing, silver-coloured design cover (black design cover on request),
multi voltage 9-32 volts.
Right-hand traffic/SAE version, FEP connector 1BL 012 488-021
Left-hand traffic, FEP connector 1ML 012 488-031
Right-hand traffic/ SAE-Version, DEUTSCH connector 1BL 012 488-121
Left-hand traffic, DEUTSCH connector 1ML 012 488-131
Type approval: ECE-R112, R87, R7, ECE-R10, 1BL 012 488-021:
3831,
1ML 012 488-031:
4090, 1BL 012 488-121: 3881,
1ML 012 488-131: 4090
90 mm: L 4060 LED low beam
This LED product has the following features:
Uniform illumination similar to daylight. Low beam,
daytime running light and position light in one module
or as a separate low beam. 40 x 60 mm polycarbonate
lens for a new design. Mounting points as for
Performance module, enabling like-for-like replacement.
Choice of FEP or DEUTSCH connection. Hardened cover lens
made of plastic. Integrated electronics, robust die-cast
aluminium housing, multi voltage: 9-32 volts.
Exact adjusting screws for Premium and Performance
mounting included with delivery.
Performance module mounting
for like-for-like replacement of
existing halogen versions
143
22,4
14,733,9
Ø90
3
114,2
114,2
* In areas where the ECE-R48 regulation applies, vehicles registered in accordance with ECE-R48, series 05 must incorporate suitable measures to safeguard active failure control of an LED headlamp in the
vehicle electrical system. The failure control is no longer mandatory for vehicles approved according to ECE-R48 series 06.
A 3A fuse from HELLA is required for all LED headlamps. A fuse of >3A is not sufficient to safely interrupt the power supply in the event of a fault.
If the degree of protection is unknown, an external safety switch (e.g. 8JD 743 557-021) can be used. If water gets in, incorrect protection can lead to damage ranging from melting to burning of the product.

FRONT LIGHTING46
FRONT LIGHTING
LED high beam headlamp L 4060
Module headlamp with 40 x 60 mm polycarbonate lens, robust die-cast aluminium
housing, silver-coloured design cover (black design cover on request),
multi voltage 9-32 volts.
Preassembled carrier frame 1F0 011 988-021
Performance mounting 1F0 011 988-121
Type approval: ECE-R112, ECE-R10,
3831
LED high beam headlamp L4060 with daytime running light/position light
Module headlamp with 40 x 60 mm polycarbonate lens, robust die-cast aluminium
housing, silver-coloured design cover (black design cover on request),
multi voltage 9-32 volts.
Preassembled carrier frame 1F0 011 988-031
Performance mounting 1F0 011 988-131
Type approval: ECE-R112, R87, R7, ECE-R10,
3831
LED high beam headlamp L4060 with direction indicator light
Module headlamp with 40 x 60 mm polycarbonate lens, robust die-cast aluminium
housing, silver-coloured design cover (black design cover on request),
multi voltage: 9 -32 volts.
Preassembled carrier frame with pulse generator* 1F0 011 988-081
Preassembled carrier frame without pulse generator* 1F0 011 988-071
Performance mounting with pulse generator* 1F0 011 988-181
Performance mounting without pulse generator* 1F0 011 988-171
Type approval: ECE-R112, R6, ECE-R10,
3831
* SAE only up to vehicle width of 2,032 mm
90 mm: L 4060 LED high beam
This LED product has the following features:
High-end illumination. High beam, daytime running
light and position light in one module, one high beam/
direction indicator light combination or high beam as a
separate module. 40 x 60 mm polycarbonate lens for a
new design. Unpatterned and hardened cover lens made of
plastic. High beam headlamp either with preassembled carrier
frame or as a 90 mm Performance module mount, enabling
like-for-like replacement. Integrated FEP connector and driver
electronics. Robust die-cast aluminium housing, multi voltage:
9-32 volts.
85
85
Ø14
(4x)
Ø6.5
(6x)
52
51
52
50
With preassembled carrier frame Performance module mounting
for like-for-like replacement of
existing halogen versions
3
14.8
33.4
A 3A fuse from HELLA is required for all LED headlamps. A fuse of >3A is not sufficient to safely interrupt the power supply in the event of a fault.
If the degree of protection is unknown, an external safety switch (e.g. 8JD 743 557-021) can be used. If water gets in, incorrect protection can lead to damage ranging from melting to burning of the product.
Pulse generator: Malfunctions of the high beam with direction indicator light module can usually be detected using the vehicle control unit. The detection stages are as follows:
DI: < 400 mA; HB: < 800 mA. If your control unit cannot detect stage < 400 mA for DI, the pulse generator will increase the amperage in an interval of 100 to 120 ms to simulate the level consistent with a
standard 12 volts (21 watts) bulb.
47
FRONT LIGHTING
With preassembled carrier frame
1N0 011 988-001
1N0 011 988-011
With preassembled carrier frame
1N0 011 988-051
1N0 011 988-061
LED fog lamp L 4060
Module headlamp with 40 x 60 mm polycarbonate lens, robust die-cast aluminium
housing, silver-coloured design cover (black design cover on request),
multi voltage 9-32 volts.
Preassembled carrier frame 1N0 011 988-001
Type approval: ECE-R19 F3, ECE-R10,
3831
LED fog lamp L 4060 with daytime running light/ position light
Module headlamp with 40 x 60 mm polycarbonate lens, robust die-cast aluminium
housing, silver-coloured design cover (black design cover on request),
multi voltage: 9 -32 volts.
Preassembled carrier frame 1N0 011 988-011
Type approval: ECE-R19 F3, R87, R7, ECE-R10,
3831
LED fog lamp L 4060 with cornering light
Module headlamp with 40 x 60 mm polycarbonate lens, robust die-cast aluminium
housing, silver-coloured design cover (black design cover on request),
multi voltage 9-32 volts.
Preassembled carrier frame, right 1N0 011 988-061
Preassembled carrier frame, left 1N0 011 988-051
Type approval: ECE-R19 F3, R119, ECE-R10,
3832
90 mm: L 4060 fog light
This LED product has the following features:
Uniform illumination similar to daylight. Fog light in
various combinations or as a separate module, with
daytime running light, position light and cornering light.
40 x 60 mm polycarbonate lens, unpatterned, hardened
cover lens made of plastic, integrated FEP connector and driver
electronics.
Robust die-cast aluminium housing, multi voltage: 9-32 volts.
A 3A fuse from HELLA is required for all LED headlamps. A fuse of >3A is not sufficient to safely interrupt the power supply in the event of a fault.
If the degree of protection is unknown, an external safety switch (e.g. 8JD 743 557-021) can be used. If water gets in, incorrect protection can lead to damage ranging from melting to burning of the product.
48
FRONT LIGHTING
90 mm: Bi-LED low beam and high beam
Bi-LED low beam and high beam headlamp L 5570
2nd generation
Module headlamp with 55 x 70 mm polycarbonate lens, robust die-cast aluminium
housing, hardened cover lens made of plastic, no moving parts, multi voltage
9-32 volts.
Right-hand traffic, FEP connector 1AL 012 758-001
Left-hand traffic, FEP connector 1LL 012 758-011
SAE version, FEP connector 1AL 012 758-021
Right-hand traffic, DEUTSCH connector 1AL 012 758-101
Left-hand traffic, DEUTSCH connector 1LL 012 758-111
SAE version, DEUTSCH connector 1AL 012 758-121
Type approval: ECE-R112, ECE-R10
This LED product has the following features:
2nd generation Bi-LED module with further enhanced lighting/electronics. 55 x 70 mm polycarbonate lens, unpatterned, hardened
cover lens made of plastic, no moving parts, passive cooling. FEP and DEUTSCH connectors, SAE version available. Integrated
function output for failure control. Multi voltage: 9-32 volts.
134,4
120
85
179,2
* In areas where the ECE R48 regulation applies, vehicles registered in accordance with ECE R48 series 05, must incorporate suitable measures to safeguard active failure control of an LED headlamp in the
vehicle electrical system. The failure control is no longer mandatory for vehicles approved according to ECE-R48 series 06.
** Set versions, consisting of 1x control unit for function monitoring and 1 x 1st gen. LED headlamp, on request.
A 3A fuse from HELLA is required for all LED headlamps. A fuse of >3A is not sufficient to safely interrupt the power supply in the event of a fault. If the degree of protection is unknown, an external safety
switch (e.g. 8JD 743 557-021) can be used. If water gets in, incorrect protection can lead to damage ranging from melting to burning of the product.

This LED product has the following features:
1ST GENERATION (SINCE 2012)
BI-LED LOW BEAM AND HIGH BEAM HEADLAMP L 70*
Module headlamp with 70 mm DE lens
Right-hand traffic 1AL 010 820-021**
Left-hand traffic 1LL 010 820-031**
Type approval: right-hand traffic: ECE
3351 / 6189, left-hand traffic: ECE
3352 / 6189
1ST GENERATION (SINCE 2011)
LED LOW BEAM HEADLAMP L 70*
Module headlamp with 70 mm DE lens
Right-hand traffic 1BL 010 820-001**
Left-hand traffic 1ML 010 820-011**
Type approval: right-hand traffic: ECE
3359 / 6189, left-hand traffic: ECE
3160 / 6189
49
FRONT LIGHTING
Bi-Halogen® headlamps
Low beam and high beam headlamps
Halogen light, low beam and high beam in one headlamp, metal reflectors with
clear DE lens. Ideal when combined with the matching high beam headlamp and
fog lamps. Incl. light source.
12 V, right-hand traffic, H7, EC E 1AL 009 998-001
12 V, left-hand traffic, H7, ECE 1LL 009 998-011
12 V, right-hand traffic, H9, SAE 1AL 009 998-021
24 V, right-hand traffic, H7, ECE 1AL 009 998-041
24 V, left-hand traffic, H7, ECE 1LL 009 998-051
Type approval: ECE-R112,
2484 and 2485
Halogen low beam headlamp
Metal reflectors with clear DE lens. Ideal when combined with the matching high
beam headlamp and fog lamps. Incl. light source.
12 V, right-hand traffic, H7, ECE 1BL 009 999-001
12 V, left-hand traffic, H7, ECE 1ML 009 999-011
12 V, right-hand traffic, H7, SAE 1BL 009 999-021
24 V, right-hand traffic, H7, ECE 1BL 009 999-041
24 V, left-hand traffic, H7, ECE 1ML 009 999-051
Type approval: ECE-R112,
2486 and 2487
90 mm Premium
High-end illumination. Low beam and high beam from a
single headlamp module. 70 mm DE lens. Unpatterned and
hardened glass cover lens. High-quality aluminium
reflector. Preassembled adjusting screws. Light source
included. Connection via 0.5 m shielded supply cable with
detachable plug connection.
Would you like to combine modules from the Premium and Performance series
without committing yourself right at the start of the vehicle design process?
Then use the tried-and-trusted Premium carrier frame structure as a basis.
Alongside the complete Premium range, the following modules from the
Performance series that are compatible with a Premium carrier frame can also
be used.
Information
Premium mountings
for Performance headlamps
90 mm high beam with PO, 12 V bulb 1KO 247 043-117
90 mm high beam with 12 V bulb 1KO 247 043-127
90 mm low beam with 12 V bulb
Right-hand traffic 1BL 247 042-177
Left-hand traffic 1ML 247 042-187
24 V variants on request
If you have been using Classic modules so far, you can easily upgrade them to
Performance modules.
The following Performance modules have the same module attachment as
the Classic module and are therefore compatible and easy to replace – without
having to modify the existing Classic carrier frame structure first.
Classic mountings
for Performance headlamps
90 mm high beam with PO, 12 V bulb 1KO 247 043-157
90 mm high beam with 12 V bulb 1KO 247 043-167
90 mm low beam with 12 V bulb
Right-hand traffic 1BL 247 042-217
Left-hand traffic 1ML 247 042-227
24 V variants on request
These products have the following features:
50
FRONT LIGHTING
90 mm: Performance low beam and high beam
Proven illumination. Modules in enhanced quality for
use on long hauls. Unpatterned and hardened glass cover
lens. High-quality aluminium reflector. With splash
water-protected plug connection. Exact adjusting
screws contained in delivery. Including light source. 24 V
versions incl. heavy-duty long-life bulbs. Low beam with
50 mm DE lens, high beam with free-form reflector.
HALOGEN HIGH BEAM HEADLAMP
Module headlamp with aluminium free-form reflector and unpatterned glass cover
lens, incl. light source.
12 V, with position light, H1,
for Performance mounting
1K0 247 043-007
12 V, without position light, H1,
for Performance mounting
1K0 247 043-017
12 V, with position light, H1, for Premium mounting 1K0 247 043-117
12 V, without position light, H1, for Premium mounting 1K0 247 043-127
Type approval: ECE
2397
24 V, with position light, H1 Heavy Duty Longlife,
for Performance mounting
1K0 247 043-027
24 V, without position light, H1,
for Performance mounting
1K0 247 043-037
12 V, with position light, H1, for Classic mounting 1K0 247 043-157
12 V, H1, for Classic mounting 1K0 247 043-167
Type approval: ECE
2397 and ECE 2398
HALOGEN LOW BEAM HEADLAMP
Module headlamp with an aluminium reflector and clear DE lens behind an
unpatterned glass cover lens, incl. light source.
12 V, right-hand traffic, H1, for Performance mounting 1BL 247 042-007
12 V, left-hand traffic, H1, for Performance mounting 1ML 247 042-027
12 V, right-hand traffic, H1, for Premium mounting 1BL 247 042-177
12 V, left-hand traffic, H1, for Premium mounting 1ML 247 042-187
24 V, right-hand traffic, H1, for Performance mounting 1BL 247 042-017
24 V, left-hand traffic, H1, for Performance mounting 1ML 247 042-037
Type approval: ECE
2397 and ECE 2398
With a technical solution for the "tourist solution", for temporary use in left-hand
traffic countries or for left-hand drive versions in right-hand traffic countries.
These products have the following features:
51
HELLA AUXILIARY HIGH BEAM HEADLAMPS
For that extra bit of light
The HELLA auxiliary high beam headlamps offer that something extra: more light, so you can stay on top of the road in
every driving situation. In turn, this increases the safety of every road user. HELLA's indisputable quality and use of
state-of-the-art technology are a given. Tried-and-tested standard solutions or innovative LED technology: whatever it
may be, the HELLA headlamp series is specially tailored to the demands of trucks and continuously developed to offer
the optimum solution for every situation. Light you can rely on!
AUXILIARY HIGH BEAM HEADLAMPS
LED Light Bars
AUXILIARY HIGH BEAM HEADLAMP LED LIGHT BAR 470
16 high-power LEDs, power requirement: 35 watts, e.g. suitable for 12 and
24 volt systems, IP 6K7 (submersible), ECE type-tested R112 and EMC R10.
Ref. 25 with universal bracket 1FJ 958 130-111
Ref. 37.5 with universal bracket 1FJ 958 130-011
Type approval: ECE
0012 (ref. 25), ECE 0013 (ref. 37.5)
AUXILIARY HIGH BEAM HEADLAMP LED LIGHT BAR 470 SINGLE TWIN
Dual headlamp for central mounting on the vehicle
2 x 8 high-intensity LEDs, power requirement: 2 x 18 watts, e.g. suitable for 12 V
and 24 V systems, IP 6K7 (submersible) and IP 6K9K, ECE type-tested R112 and
EMC R10.
Ref. 17.5 + 17.5 with universal bracket 1FJ 958 130-301
Type approval: ECE
0019 (ref. 17.5 + 17.5)
This LED product has the following features:
* Only for off-road applications and for use as a work light – not approved for use in road traffic.
57
44
528
42
67
OFF-ROAD HEADLAMPS LED LIGHT BAR 470 COMBI*
Headlamp with 2 light beams: wide and expansive
2 x 8 high-intensity LEDs, power requirement: 2 x 18 watts, e.g. suitable for 12 V and
24 V systems, IP 6K7 (submersible) and IP X9K, ECE type-tested EMC R10.
Off-road headlamps with universal bracket 1GJ 958 130-461
Type approval: CE-type-tested ECE R10 EMC
(electromagnetic compatibility)
This LED product has the following features:
57
44
528
42
67
Long-range illumination
Close-range illumination (wide)
Combination illumination
ACCESSORIES - PROTECTIVE CAPS FOR LED LIGHT BARS 470
Protective cap transparent 8XS 958 337-021
Protective cap amber (transparent) 8XS 958 337-031
Protective cap black (with white HELLA logo) 8XS 958 337-111
The use of protective caps is not permitted within areas governed by StVZO.
Please observe the valid regulations
Application example
53
AUXILIARY HIGH BEAM HEADLAMPS
AUXILIARY HIGH BEAM HEADLAMP LED LIGHT BAR 350
12 high-power LEDs, power requirement: 25 watts, e.g. suitable for 12 and
24 volt systems, IP 6K7 (submersible), ECE type-tested R112 and EMC R10.
Ref. 20 with universal bracket 1FJ 958 040-072
Ref. 30 with universal bracket 1FJ 958 040-082
Type approval: ECE
0008 (ref. 20), ECE 0009 (ref. 30)
This LED product has the following features:
57
44
408
42
67
SPARE PARTS/ACCESSORIES FOR LED LIGHT BAR SERIES
Bracket set (2 universal brackets) 8HG 958 139-841
Bracket (1 universal bracket without steel bracket, also for customised brackets) 8HG 958 139-071
Bracket set (2 steel brackets for dual mounting) 8HG 958 128-811
This LED product has the following features:
AUXILIARY HIGH BEAM HEADLAMP HELLA VALUEFIT DLB 540
9 high-intensity LEDs, power requirement: 66 watts, e.g. suitable for 12 V and
24 V systems, IP 67, ECE type-tested R112 and EMC R10.
Ref. 37.5 incl. bracket 1FJ 360 002-502
Type approval: ECE,
0027
ROKLUME
This LED product has the following features:
AUXILIARY HIGH BEAM HEADLAMP ROKLUME 380 N
For heavy-duty applications with intense illumination of the area in front of the vehicle
12 high-power LEDs, power requirement: max. 85 watts, IP 6K9K, IP 6K8,
Fording ability: up to 1 m water depth (max. 60 min), ECE type-tested R112 and
EMC R10.
Ref. 40 with stainless steel mounting bracket, 24 V 1FA 996 197-181
Ref. 40 with black mounting bracket
made of stainless steel, 12 V (w/o fig.)
1FA 996 197-151
Type approval: ECE,
4517
min 574 - max 594
539
80
98
M8
54
AUXILIARY HIGH BEAM HEADLAMPS
LUMINATOR
This LED product has the following features:
LUMINATOR COMPACT LED
LED high beam headlamp, power requirement: 11 watts, e.g. suitable for 12 V and
24 V systems, ECE ref. 45.
With chrome design ring 1F3 011 815-001
With matt black design ring 1F3 011 815-011
Type approval: ECE,
3738
SPARE PARTS/ACCESSORIES
Cover lens with chrome design ring 9AG 195 614-001
Cover lens with matt black design ring 9AG 195 614-011
This LED product has the following features:
LUMINATOR X LED
LED high beam headlamp, power requirement: 40 watts, e.g. suitable for 12 V and
24 V systems, ECE ref. 37.5.
With chrome design ring 1F0 012 206-001
With matt black design ring 1F0 012 206-011
Type approval: ECE,
0417
SPARE PARTS/ACCESSORIES
Cover lens with seal 9ES 199 813-001
Matt black design ring 9AG 199 812-011
This LED product has the following features:
222.4
129.6
90.5
232.5
LUMINATOR LED
LED high beam headlamp with LED position light and horizontal cooling fin,
die-cast zinc housing, power requirement: 12 V: position light 2.4 watts and high
beam 14.5 watts; 24 V: position light 5 watts and high beam 14.5 watts, e.g. suitable
for 12 V and 24 V systems, ref. 25 or 50
Luminator LED high beam headlamp,
metal (ECE ref. 25)
1F8 016 560-001
Luminator LED high beam headlamp,
metal (ECE ref. 50)
1F8 016 560-011
Luminator LED high beam headlamp,
chromium (ECE ref. 25)
1F8 016 560-021
Luminator LED high beam headlamp,
chromium (ECE ref. 50)
1F8 016 560-031
Type approval: ECE-R112 high beam, ECE-R7 position light, ECE-R10 EMC
SPARE PARTS/ACCESSORIES
LED headlamp insert (ECE ref. 25) with LED
position light
1F8 241 400-011
LED headlamp insert (ECE ref. 50) with LED
position light
1F8 241 429-011
Chromium
Metal
Upright mounting.
Tilt angle + / - 7°
55
AUXILIARY HIGH BEAM HEADLAMPS
LUMINATOR
This product has the following features:
222.4 129.6
90.5
232.5
LUMINATOR CHROMIUM WITH POSITION LIGHT
H1 high beam headlamp with position light (W5W)
Housing, glass holder and bracket made of die-cast zinc, chromium-plated.
High beam headlamp, ECE ref. 50 1F8 007 560-411
High beam headlamp, ECE ref. 37.5 1F8 007 560-311
High beam headlamp, ECE ref. 17.5 1F8 007 560-341
Type approval: ECE,
3099 (ref. 50), 1928 (37.5), 2254 (17.5)
Simple upgrade from halogen to full LED
LED headlamp insert (ECE ref. 25)
with LED position light
1F8 241 400-011
LED headlamp insert (ECE ref. 50)
with LED position light
1F8 241 429-011
This LED product has the following features:
222.4 129.6
90 5
232.5
LUMINATOR CHROMIUM WITH LED POSITION LIGHT
H1 high beam headlamp with LED position light
Housing, glass holder and bracket made of die-cast zinc, chromium-plated.
High beam headlamp, ECE ref. 25 1F8 007 560-451
Type approval: ECE,
3047
Simple upgrade from halogen to full LED
LED headlamp insert (ECE ref. 25)
with LED position light
1F8 241 400-011
LED headlamp insert (ECE ref. 50)
with LED position light
1F8 241 429-011
This product has the following features:
222.4 129.6
90.5
232.5
LUMINATOR CHROMIUM CELIS WITH LED POSITION LIGHT
H1 high beam headlamp with Celis LED position light
High beam headlamp, ECE ref. 17.5 1F8 007 560-211
Type approval: ECE,
1753
Simple upgrade from halogen to full LED
LED headlamp insert (ECE ref. 25)
with LED position light
1F8 241 400-011
LED headlamp insert (ECE ref. 50)
with LED position light
1F8 241 429-011
56
AUXILIARY HIGH BEAM HEADLAMPS
LUMINATOR COMPACT CHROMIUM
H1 high beam headlamp
High beam headlamp, ECE ref. 37.5 1F3 009 094-031
High beam headlamp, ECE ref. 17.5 1F3 009 094-071
Type approval: ECE,
1901 (ref. 37.5) and 1902 (ref. 17.5)
This product has the following features:
JUMBO 320
JUMBO 320 FF
H7 high beam headlamp
High beam headlamp (ECE ref. 37.5) 1FE 008 773-001
High beam headlamp (ECE ref. 17.5) 1FE 008 773-011
Type approval: ECE,
1655 (ref. 37.5) and 1740 (ref. 17.5)
JUMBO 320 FF WITH LED POSITION LIGHT
H7 high beam headlamp with LED position light
High beam headlamp (ECE ref. 37.5) 1FE 008 773-081
Type approval: ECE,
1655 (ref. 37.5), 1741 (LED-PO)
JUMBO 320 FF WITH POSITION LIGHT
H7 high beam headlamp with position light (W5W)
High beam headlamp (ECE ref. 37.5) 1FE 008 773-041
Type approval: ECE,
1655
This LED product has the following features:
This product has the following features:
57
222
124.2
49.3
242
AUXILIARY HIGH BEAM HEADLAMPS
RALLYE 3003
RALLYE 3003 WITH CELIS POSITION LIGHT
With chrome design ring, H1 high beam headlamp with round Celis LED position
light
High beam headlamp (ECE ref. 17.5) 1F8 009 797-451
Type approval: ECE,
1753
Simple upgrade from halogen to full LED
LED headlamp insert (ECE ref. 25)
with LED position light
1F8 241 400-011
LED headlamp insert (ECE ref. 50)
with LED position light
1F8 241 429-011
RALLYE 3003 WITH LED-POSITION LIGHT
H1 high beam headlamp with LED position light and chrome design ring
High beam headlamp (ECE ref. 25) 1F8 009 797-431
Type approval: ECE,
3047
Simple upgrade from halogen to full LED
LED headlamp insert (ECE ref. 25)
with LED position light
1F8 241 400-011
LED headlamp insert (ECE ref. 50)
with LED position light
1F8 241 429-011
This LED product has the following features:
This LED product has the following features:
RALLYE 3003 LED
LED high beam headlamp with LED position light and horizontal cooling fin,
impact-resistant thermoplastic housing, power requirement: 12 V: position light
2.4 watts and high beam 14.5 watts; 24 V: position light 5 watts and high beam
14.5 watts, e.g. suitable for 12 V and 24 V systems, ref. 25 or 50
Rallye 3003 LED high beam headlamp (ECE ref. 25) 1F8 016 797-001
Rallye 3003 LED high beam headlamp (ECE ref. 50) 1F8 016 797-011
Type approval: ECE-R112 high beam, ECE-R7 position light, ECE-R10 EMC
Spare part*
LED headlamp insert (ECE ref. 25)
with LED position light
1F8 241 400-011
LED headlamp insert (ECE ref. 50)
with LED position light
1F8 241 429-011
* Also for upgrading the Rallye 3003 Halogen
This LED product has the following features:
Upright mounting.
Tilt angle - 45° to + 90°
58
AUXILIARY HIGH BEAM HEADLAMPS
RALLYE 3003 COMPACT
H1 high beam headlamp with chrome design ring
High beam headlamp (ECE ref. 37.5) 1F3 010 119-111
High beam headlamp (ECE ref. 17.5) 1F3 010 119-101
Type approval: ECE,
1901 (ref. 37.5), 1902 (ref. 17.5)
This product has the following features:
RALLYE 3003 WITH POSITION LIGHT
H1 high beam headlamp with position light (W5W) and chrome design ring
High beam headlamp (ECE ref. 50) 1F8 009 797-341
High beam headlamp (ECE ref. 37.5)
1F8 009 797-101
(without fig.)
Type approval: ECE,
3099 (ref. 50) and 1928 (ref. 37.5)
Simple upgrade from halogen to full LED
LED headlamp insert (ECE ref. 25)
with LED position light
1F8 241 400-011
LED headlamp insert (ECE ref. 50)
with LED position light
1F8 241 429-011
This product has the following features:
Product photo Description Part number VPE
Bulb H1
12 V, 55 W
8GH 002 089-131
24 V, 70 W
8GH 002 089-251
1
1
Bulb H7
12 V, 55 W
8GH 007 157-121
24 V, 70 W
8GH 007 157-241
1
1
Spare parts/accessories
59
FS LED / LED-PO
12 V, PO: 2.4 W, FS: 14.5 W
24 V, PO: 5 W, FS: 14.5 W
Metal
1F8 016 560-001
Chromium
1F8 016 560-021
AUXILIARY HIGH BEAM HEADLAMPS
LED Light Bar
LED Light Bar 470, ECE ref. 25
LED high beam headlamp
12 / 24 V, 35 W 1FJ 958 130-111
LED Light Bar 470, ECE ref. 37.5
LED high beam headlamp
12 / 24 V, 35 W 1FJ 958 130-011
LED Light Bar 470 Single Twin, ECE ref. 17.5 + 17.5
2 x LED high beam headlamps
12 / 24 V, 2 x 18 W 1FJ 958 130-301
1 x ECE ref. 17.5
1 x ECE ref. 17.5
LED Light Bar 350, ECE ref. 20
LED high beam headlamp
12 / 24 V, 25 W 1FJ 958 040-072
LED Light Bar 350, ECE ref. 30
LED high beam headlamp
12 / 24 V, 25 W 1FJ 958 040-082
Luminator
FS LED / LED-PO
12 V, PO: 2.4 W, FS: 14.5 W
24 V, PO: 5 W, FS: 14.5 W
Metal
1F8 016 560-011
Chromium
1F8 016 560-031
Luminator LED Chromium, ref. 25
Luminator, ECE ref. 50
LED high beam headlamp
with position light
24 V
Chromium
1F8 007 560-411
Luminator, ECE ref. 25
High beam headlamp
with LED position light
12 / 24 V
1F8 007 560-451
Luminator Compact Chromium, ECE ref. 37.5
High beam headlamps
24 V
1F3 009 094-031
Luminator LED metal, ref. 50
Luminator Compact LED, ECE ref. 45
LED high beam headlamp
12/ 24 V, 11 W
Chrom-Designring
1F3 011 815-001
60
AUXILIARY HIGH BEAM HEADLAMPS
VALUEFIT
HELLA VALUEFIT DLB, ECE ref. 37.5
LED high beam headlamp
12 / 24V, 66W 1FJ 360 002-502
RokLUME
RokLUME 380 N, ECE ref. 40
LED high beam
headlamp
24 V, 85 W
1FA 996 197-181
Jumbo
Jumbo 320 FF, ECE ref. 37.5
High beam headlamp,
12 / 24 V with LED position light
1FE 008 773-081
With position light W5W
1FE 008 773-041
Without position light
1FE 008 773-001
Rallye
Rallye 3003 Celis, high beam headlamp with LED position light, ECE / SAE ref. 17.5
12 / 24 V
1F8 009 797-451
Rallye 3003, high beam headlamp with LED position light, ECE / SAE ref. 25
12 / 24 V
Silver-coloured ring
1F8 009 797-421
Chromring
1F8 009 797-431
Rallye 3003, LED high beam headlamps with position light, ECE ref. 50
24 V
1F8 009 797-341
Rallye 3003, high beam headlamp with position light, ECE ref. 37.5
24 V
1F8 009 797-101
Rallye 3003 Compact, high beam headlamp, ECE ref. 37.5
24 V
1F3 010 119-111
Rallye 3003 Compact, high beam headlamp, ECE ref. 17.5
24 V
1F3 010 119-101
Headlamp for high beam (integrated into headlamp and auxiliary high beam headlamp)
Mounting Required for all passenger car classes
Number
2 or 4 pieces, for N
3
vehicles* max. 6 pieces
Switch on the high beam only if the oncoming traffic is not dazzled
Mounting height No special regulations, i.e. can be freely selected up to a height of 4 m
Mounting width No special regulations but must be installed in such a way that the driver is
not disturbed by reflections
Electrical circuit
The high beam headlamps may only be switched on simultaneously or
in pairs.
If two additional high beam headlamps are fitted, then no more than two
pairs may be switched on at the same time. During the transition from low
beam to high beam, at least one pair needs to be switched on for high beam.
When low beam is switched on, all high beam headlamps must switch off at
the same time.
Further regulations
The sum of the reference numbers of all high beam headlamps that are
operational on the vehicle must not exceed 100.
* N
3
vehicles: for the transportation of goods with a permissible total weight > 12 t
4 m
Example – N
3
vehicle category > 12 t
Permitted mounting positions
Key
FS = High-beam headlamp | FS LED = High beam headlamp LED | LED-PO = LED position light
Rallye 3003 LED, Ref. 50
FS LED / LED-PO
12 V, PO: 2.4 W, FS: 14.5 W
24 V, PO: 5 W, FS: 14.5 W
1F8 016 797-011
Rallye 3003 LED, Ref. 25
FS LED / LED-PO
12 V, PO: 2.4 W, FS: 14.5 W
24 V, PO: 5 W, FS: 14.5 W
1F8 016 797-001
61
HELLA WIRING SYSTEMS -
ALWAYS WELL CONNECTED.
The EasyConn connector system is made up of
2, 7, and 15-pin connector housings and
female connector housings. For even easier
mounting on the trailer, their diameter has
been significantly reduced. SUPERSEAL and
7-pin DIN bayonet plug connectors can be used
to expand the system. This allows combining
lighting systems flexibly and retrofitting and/or
converting them, especially in trailers.
The 15-pin front, central and rear main cables
in the wiring are still treated as a constituent
part of the tried-and-tested EasyConn system.
The wiring system makes it quick and easy
to connect new products to various existing
systems.
COLOURS WITH SYSTEM
Simple connection of all components with process reliability, thanks to the colour system from HELLA
7-pin EasyConn connector
Rear lamps are connected to the
EasyConn system via the 7-pin
connector housing and female
connector housing.
15-pin EasyConn connector
The 15-pin EasyConn connector
housing and female connector
housing connect the front adapter,
HVL and rear adapter to one
another.
15-pin EasyConn connector II
The proven 15-pin plug
connections are also available as
a connector set, making it easy
to implement customer-specific
requests and repairs.
7-pin DIN bayonet connector
Our round lamp system and third-
party products can be connected
via a 7-pin DIN bayonet connector.
LED HYBRID REAR LAMPLED HYBRID ROUND LAMP SYSTEMS
2-pin SUPERSEAL connector
With the 2-pin SUPERSEAL
connection, customers have
access to yet another reliable
product for connecting single-
function lamps.
2-pin EasyConn connector
The 2-pin EasyConn connector
and female connector housing
allows, for example, SMLR,
position lamps, clearance lamps
and 2-pin additional functions to
be connected.
Quick-Link
Our quick link press connection:
flexible and safe assembly of
single-function lamps on our
HELLA flat cable.
HELLA REAR LAMPS
A crowning finish for the vehicle rear end
Also in the area of vehicle rear lighting, the introduction of LED lighting has resulted in a quantum leap in developing
new, innovative lighting concepts – and HELLA has played a leading role in this development from the very beginning.
The combination options of LED and innovative optics systems open up attractive styling options for a unique brand-
specific appearance, which is playing an increasingly important role, even for vehicles in the commercial and
agricultural fields.
An impressive example made by HELLA: the extraordinary Krone hybrid or full LED rear lamp with integrated logo.
REAR LAMPS
MAN FULL LED TRUCK REAR LAMP
Full LED rear lamp for horizontal mounting. With standard direction indicator light.
With glowing-body strip optics. Replaceable, non-patterned lens. Curved outer
lens for optimum tightness. Housing PC and ABS black, 2 fastening screws M8
(distance: 152 mm), with direction indicator failure control. Protection class:
IP 5K4K, IP X9K.
Tail lamp/reflex reflector/stop lamp/direction indicator/rear fog lamp/reverse
lamp/clearance lamp/side marker reflector lamp.
With 7-pin DIN connector
Left, with licence plate light 2VD 012 381-011
Right, without licence plate light 2VP 012 381-021
Left, without licence plate light 2VP 012 381-051
Right, without licence plate light, with backup alarm 2VP 012 381-061
With 500 mm cable and 7-pin DIN connector
Left, with licence plate light 2VD 012 381-031
Right, without licence plate light 2VP 012 381-041
Right, without licence plate light, with backup alarm 2VP 012 381-081
Spare parts/accessories:
Lens 9EL 208 551-011
LED direction indicator control unit, 24 V 5DS 227 488-101
LED flasher unit, 24 V 4DW 009 492-011

300
130
This LED product has the following features:
Functions LEDs Output
Current
consumption
Tail light 12 red 24 V / 2.8 W 0.12 A
Stop light 18 red 24 V / 2.2 W 0.09 A
Direction indicator light 6 amber 24 V / 4.2 W 0.18 A
Rear fog light 8 red 24 V / 2.5 W 0.10 A
Reversing light 4 white 24 V / 4.7 W 0.20 A
Side marker light 5 red 24 V / 2.8 W 0.12 A
Licence plate light 4 white 24 V / 1.7 W 0.07 A
Pin assignment
1 Ground (white)
2 Tail light (black)
3 Reversing light (pink)
4 Direction indicator light (amber/green)
5 Stop light (red)
6 Rear fog light (blue)
7 Free or backup alarm (...)
Application example
4
3
2
1
7
6
5
65
REAR LAMPS
DAF FULL LED TRUCK REAR LAMP
Full LED rear lamp for horizontal mounting. With dynamic direction indicator light.
With glowing-body C optics. Replaceable, non-patterned lens. Curved outer lens for
optimum tightness. Housing PC and ABS black, 2 fastening screws M8, with pulse
for direction indicator failure control. Protection class:
IP 5K4K, IP X9K.
Tail lamp/reflex reflector/stop lamp/direction indicator/rear fog lamp/reverse
lamp/clearance lamp/side marker reflector lamp.
With 8-pin HCSCS connector; distance between fastening screws: 160 mm
With side connector
Left, with licence plate light 2VD 012 381-211
Right, without licence plate light 2VP 012 381-221
Right, without licence plate light, with backup alarm 2VP 012 381-241
With rear connector
Left, with licence plate light 2VD 012 381-251
Right, without licence plate light 2VP 012 381-261
Right, without licence plate light, with backup alarm 2VP 012 381-281
With 7-pin DIN connector; distance between fastening screws: 152 mm
With side connector
Left, with licence plate light 2VD 012 381-311
Right, without licence plate light 2VP 012 381-321
Right, without licence plate light, with backup alarm 2VP 012 381-341
With rear connector
Left, with licence plate light 2VD 012 381-351
Right, without licence plate light 2VP 012 381-361
Right, without licence plate light, with backup alarm 2VP 012 381-381
Spare parts/accessories:
Lens 9EL 208 551-001
LED direction indicator control unit, 24 V 5DS 227 488-101
LED flasher unit, 24 V 4DW 009 492-011

300
130
This LED product has the following features:
Functions LEDs Output
Current
consumption
Tail light 12 red 24 V / 2.8 W 0.12 A
Stop light 18 red 24 V / 2.2 W 0.09 A
Direction indicator light 6 amber 24 V / 4.2 W 0.18 A
Rear fog light 8 red 24 V / 2.5 W 0.10 A
Reversing light 4 white 24 V / 4.7 W 0.20 A
Side marker light 5 red 24 V / 2.8 W 0.12 A
Licence plate light 4 white 24 V / 1.7 W 0.07 A
Application example
Pin assignment
1 Ground (white)
2 Free or backup alarm (black)
3 Free (...)
4 Rear fog light (blue)
5 Tail light (black)
6 Reversing light (pink)
7 Direction indicator light (amber/green)
8 Stop light (red)

4
3
2
1
7
8
6
5
66
REAR LAMPS
HYBRID AND FULL LED REAR LAMP WITH KRONE LOGO
Hybrid or full LED rear lamp, tail lamp/stop lamp/direction indicator/rear fog
lamp/reverse lamp with reflex reflector, with or without rubber arm.
Series 340 960/340 961 with white frame.
With pulse for direction indicator failure control (full LED versions).
Hybrid with EasyConn connector (7-pin)
With rubber arm (LED clearance light)
Left (amber) 2VP 340 961-531
Right (blue) 2VP 340 961-541
Without rubber arm (LED clearance light)
Left (amber) 2VP 340 961-511
Right (blue) 2VP 340 961-521
Full LED with EasyConn connector (7-pin)
With rubber arm (LED clearance light)
Left (amber) 2VP 340 960-231
Right (blue) 2VP 340 960-241
Without rubber arm (LED clearance light)
Left (amber) 2VP 340 960-251
Right (blue) 2VP 340 960-261
Type approval: ECE-R65, ECE-R10; GGVS / ADR: only full LED 2VP 340 960- …

This LED product has the following features:
Functions LEDs Output
Current
consumption
Tail light 7 red 24 V/0.02 W 0.01 A
Stop light 7 red 24 V / 20 W 0.83 A
Direction indicator light 7 amber 24 V / 3 W 0.13 A
Rear fog light 7 red 24 V/2.5 W 0.10 A
Reversing light 6 white 24 V/2.5 W 0.10 A
Clearance light 1 red/1 white 24 V/1.2 W 0.05 A
Side marker light 2 amber 24 V / 1 W 0.04 A
Also available: The Krone licence plate lamp
Further information on these products can be found in the
Licence plate lamps chapter on page 84.
72
(32)
#20
(93)
LED LICENCE PLATE LAMP
With 2,000 mm cable and 6.3 mm flat connector 2KA 012 271-231
With 1,300 mm cable and 2-pin EasyConn angled connector 2KA 012 271-271
LENS
Left 9EL 183 432-031
Right 9EL 183 432-041
67
REAR LAMPS
This LED product has the following features:
LED hybrid rear lamp
Modular standard hybrid trailer rear lamp, 24 V, for horizontal mounting, tail-stop
light always in LED, all other functions possible with bulb or by retrofitting to LED.
Tail lamp/stop lamp/direction indicator/fog lamp/reverse lamp with triangular
reflex reflector, with or without rubber arm. With black frame.
Functions: LED tail-stop light bulb: direction indicator light, rear fog light and
reversing light
Without rubber arm (LED clearance light)
Hybrid, left (amber) 2VP 340 961-011
Hybrid, right (blue) 2VP 340 961-021
With rubber arm
Left (amber) 2VP 340 961-411
Right (blue) 2VP 340 961-421
Functions: LED: tail-stop light and rear fog light bulb: direction indicator light
and reversing light
Without rubber arm (LED clearance light)
Hybrid, left (amber) 2VP 340 961-031
Hybrid, right (blue) 2VP 340 961-041
With rubber arm
Left (amber) 2VP 340 961-431
Right (blue) 2VP 340 961-441
Functions: LED tail-stop light and side marker light bulb: direction indicator
light, rear fog light, reversing light and clearance light
With rubber arm (LED clearance light)
Hybrid, left (amber) 2VP 340 961-111
Hybrid, right (blue) 2VP 340 961-121
Functions: LED tail-stop light and clearance light
bulb: direction indicator light and rear fog light with rubber arm
Hybrid, left (amber) 2VP 340 961-131
Hybrid, right (blue) 2VP 340 961-141
Functions: LED tail-stop light/rear fog light and clearance light bulb: direction
indicator light with rubber arm
Hybrid, left (amber) 2VP 340 961-151
Hybrid, right (blue) 2VP 340 961-161
Functions: LED: tail-stop light, direction indicator light and side marker light
bulb: direction indicator light, rear fog light and reversing light, without rubber
arm
Hybrid, left (amber) 2VP 340 961-211
Hybrid, right (blue) 2VP 340 961-221
Functions: LED: tail-stop light and clearance light bulb: direction indicator light, rear fog
light and reversing light, with flash SMLR, without rubber arm
With integrated electronics for controlling flashing LED side
marker lamps with rubber arm
Hybrid, left (amber) 2VP 340 965-111
Hybrid, right (blue) 2VP 340 965-121


Functions LEDs Output Current consumption
Tail light 7 red 24 V / 0.02 W 0.01 A
Stop light 7 red 24 V / 20 W 0.83 A
Direction indicator
light
7 amber 24 V / 3 W 0.13 A
Reversing light 6 white 24 V / 2.5 W 0.10 A
Rear fog light 7 red 24 V / 2.5 W 0.10 A
With rubber arm
Clearance light
1 red,
1 white
24 V / 1.2 W 0.05 A
Side marker reflex
reflector light
2 amber 24 V / 1 W 0.04 A
68
REAR LAMPS

Full LED rear lamp
Modular standard full LED trailer rear lamp, 24 V, for horizontal mounting, clear
lens, with pulse for direction indicator failure control.
Protection classes: lamp IP 5K4K, LED module IP 6K9K.
Tail lamp/stop lamp/direction indicator/rear fog lamp and reverse lamp with
triangular reflex reflector, with or without rubber arm. With black frame.
Functions LEDs Output Current consumption
Tail light 7 red 24 V/0.2 W 0.01 A
Stop light 7 red 24 V / 20 W 0.83 A
Direction indicator
light
7 amber 24 V / 3 W 0.13 A
Reversing light 6 white 24 V/2.5 W 0.10 A
Rear fog light 7 red 24 V/2.5 W 0.10 A
With rubber arm
Clearance light 1 red 24 V/1.2 W 0.05 A
Side marker light 2 amber 24 V / 1 W 0.04 A
Without rubber arm
Left (amber) 2VP 340 960-011
Right (blue) 2VP 340 960-021
Left 2VP 340 960-271
Right 2VP 340 960-281
With rubber arm
Left (amber) 2VP 340 960-111
Right (blue) 2VP 340 960-121
Flash encoder for SMLR and rubber arm
Versions with integrated electronics for controlling flashing
LED side marker lamps.
With rubber arm
Left (amber) 2VP 340 964-111
Right (blue) 2VP 340 964-121
Without rubber arm
Left (amber) 2VP 340 964-011
Right (blue) 2VP 340 964-021

This LED product has the following features:
With rubber arm
Without rubber arm
69
"COLUNA" FULL LED REAR LAMP
Full LED five-chamber lamp. With triangular reflex reflector for horizontal
mounting on 24 V trailers. 12 red LEDs for tail light function designed as
light curtain. With fastening bolt from the rear. With pulse for direction indicator
failure control.
1,000 mm cable with EasyConn connector (7-pin)
Left (amber) 2VP 345 900-011
Right (blue) 2VP 345 900-021
1,000 mm cable with DIN bayonet connector AMP (7-pin)
Left 2VP 345 900-091
Right 2VP 345 900-101
3,000 mm cable with 6.3 mm flat receptacles
Left 2VP 345 900-131
Right 2VP 345 900-141
Type approval:
5879 and 5880, 10R 04 0071, EMC



300
40
130
This LED product has the following features:
Functions LEDs Output Current consumption
Tail light 12 red 24 V / 2.8 W 0.12 A
Stop light 6 red 24 V / 2 W 0.08 A
Direction indicator
light
6 amber 24 V / 3.8 W 0.16 A
Rear fog light 6 red 24 V / 2.4 W 0.10 A
Reversing light 6 white 24 V / 5.6 W 0.23 A
REAR LAMPS70
This LED product has the following features:
This LED product has the following features:
300
130
40
300
130
40
"COLUNA" FULL LED REAR LAMP
Full LED rear lamp, tail lamp, stop lamp, direction indicator, rear fog lamp, reverse
lamp with reflex reflector. With 36 LEDs.
With rectangular reflex reflector for horizontal and vertical mounting.
With 3,000 mm cable and 6.3 mm flat receptacles. Can be used on the right or left.
With pulse for direction indicator failure control
12 V /13.7 W, current consumption = approx. 1.14 A
24 V /16.6 W, current consumption = approx. 0.69 A
Mounted by inserted fastening screws from the front
12 V 2VP 345 900-441
24 V 2VP 345 900-241
Fastening bolt from the rear
12 V 2VP 345 900-461
24 V 2VP 345 900-261
Type approval:
5879 and 5880, 10R 04 0071, EMC
"COLUNA" FULL LED REAR LAMP
Full LED rear lamp, tail lamp, stop lamp, direction indicator, rear fog lamp, reverse
lamp with reflex reflector. With 36 LEDs.
With rectangular reflex reflector for horizontal and vertical mounting.
With 3,000 mm cable and 6.3 mm flat receptacles. Can be used on the right or left.
Without pulse for direction indicator failure control
12 V /13.7 W, current consumption = approx. 1.14 A
24 V /16.6 W, current consumption = approx. 0.69 A
Mounted by inserted fastening screws from the front
12 V 2VP 345 900-451
24 V 2VP 345 900-251
Fastening bolt from the rear
12 V 2VP 345 900-471
24 V 2VP 345 900-271
Type approval:
5879 and 5880, 10R 04 0071, EMC
REAR LAMPS 71
REAR LAMPS
Ø 140,2 17 82
HYBRID AND FULL LED REAR LAMP
Suitable for left-hand and right-hand mounting. Lens replaceable in case of
damage. Tail lamp, stop lamp and direction indicators are suitable for double
mounting.
Functions LEDs Output Current consumption
Tail light 6 24 V / 0.25 W 0.01 A
Stop light 6 24 V / 2.45 W 0.10 A
Direction indicator
light
3 24 V / 1.9 W 0.08 A
Rear fog light 6 24 V / 2.45 W 0.10 A
Reversing light 3 24 V / 1.9 W 0.08 A
With bulb
Direction indicator
light
24 V / 21 W 0.88 A
Accessories
Replacement lens 9EL 213 522-001
Cap 9XX 340 814-017
  
This LED product has the following features:
Hybrid: a) tail-stop light (LED) and direction indicator light (bulb)
300 mm cable, Y-adapter on 7-pin DIN bayonet connector and 7-pin DIN bayonet
plug housing
With integrated resistor for stop light
function
2SD 013 155-001
cd
e
Without resistance 2SD 013 155-011
cd
e
3,000 mm cable with 6.3 mm flat receptacle connection
With integrated resistor for stop light
function
2SD 013 155-021
cd
e
Without resistance 2SD 013 155-031
cd
e
Full LED: b) tail light, stop light and direction indicator light (LED), with GGVS/ADR
approval
300 mm cable, Y-adapter on 7-pin DIN
bayonet connector and 7-pin DIN bayonet
plug housing, without
resistor
2SD 013 155-101
cd
e
3,000 mm cable with 6.3 mm flat
receptacle connection, without resistor
2SD 013 155-111
cd
e
c) Rear fog light, reversing light (LED) with GGVS / ADR approval
300 mm cable, Y-adapter on 7-pin DIN
bayonet connector and separate outflow
2-pin AMP SUPERSEAL (for connection of
auxiliary lighting functions)
2NR 013 155-201 
fg
300 mm cable with 7-pin DIN bayonet
connector
2NR 013 155-211
fg
3,000 mm cable with 6.3 mm flat
receptacle connection
2NR 013 155-221
fg
Type approval: ECE-R10
c
Tail light
d
Stop light
e
Direction indicator light
f
Rear fog light
g
Reversing light
72
REAR LAMPS
Universal rear combination lamps
LED TAIL-STOP LAMP "STRIP LAMP"
Mounting variant, horizontal and vertical, low power consumption, 24 V,
lens made of particularly impact-resistant Grilamid®, with 300 mm cable.
24 V 2SB 980 887-211
Type approval: ECE
10R 04-2913 and 5891
This LED product has the following features:
LED DIRECTION INDICATOR "STRIP LAMP"
Ultra-flat design, surface-mounted variant, without pulse for direction indicator
failure control, low power consumption, 12 and 24 V, lens made of particularly
impact-resistant Grilamid®.
12 V, horizontal 2BA 980 888-311
12 V, vertical 2BA 980 888-511
24 V, horizontal 2BA 980 888-411
24 V, vertical 2BA 980 888-611
Type approval: ECE
5869 and ECE 5890
This LED product has the following features:
73
REAR LAMPS
LED DIRECTION INDICATOR "STRIP LAMP"
Without pulse for direction indicator failure control, surface-mounted variant,
horizontal and vertical, low power consumption, 24 V, lens made of particularly
impact-resistant Grilamid®, with 2,500 mm cable.
24 V 2BA 980 888-211
Type approval: ECE
10R 04-2910 (only 24 V) and 5891
This LED product has the following features:
LED AUXILIARY STOP LAMP "STRIP LAMP"
Surface-mounted variant, horizontal and vertical, low power consumption, 12 and
24 V, lens made of particularly impact-resistant Grilamid®, with 2,500 mm cable.
12 V 2DA 980 887-311
24 V 2DA 980 887-411
Type approval: ECE
10R 04-2910 (only 24 V) and 0087
This LED product has the following features:
74
REAR LAMPS
LED REVERSE LAMP "STRIP LAMP"
Surface-mounted variant, horizontal or vertical, low power consumption, 12 and
24 V, lens made of particularly impact-resistant Grilamid®, with 2,500 mm cable.
12 V, horizontal 2ZR 980 889-011
12 V, vertical 2ZR 980 889-111
24 V, horizontal 2ZR 980 889-211
24 V, vertical 2ZR 980 889-311
Type approval: ECE
0027 (horizontal) and 0028 (vertical)
This LED product has the following features:
LED REAR FOG LAMP "STRIP LAMP"
Surface-mounted variant, horizontal and vertical, low power consumption, 12 and
24 V, lens made of particularly impact-resistant Grilamid®, with 2,500 mm cable.
12 V 2NE 980 889-501
24 V 2NE 980 889-601
Type approval: ECE
10R 04-2910 (only 24 V) and 0010
This LED product has the following features:
75
REAR LAMPS
Auxiliary stop lamps
This LED product has the following features:
LED AUXILIARY STOP LAMPS
For horizontal or vertical mounting. Construction height 9.5 mm (installed
condition). Screw attachment. With 3,000 mm cable. Approved for ECE.
Functions LEDs Output
Current
consumption
Red lens
Auxiliary stop light 10 red 12 V/0.7 W 0.06 A
Open cable ends 2DA 343 106-001
Auxiliary stop light 10 red 24 V/1.4 W 0.06 A
Open cable ends 2DA 343 106-011
Smoked glass lens
Auxiliary stop light 10 red 12 V/0.7 W 0.06 A
Open cable ends 2DA 343 106-021
Auxiliary stop light 10 red 24 V/1.4 W 0.06 A
Open cable ends 2DA 343 106-031
Type approval: ECE
7696
This LED product has the following features:
LED AUXILIARY STOP LAMPS
With red lens. Adhesive attachment. For horizontal mounting. With 200 mm cable
and 6.3 mm flat receptacles. Approved for ECE. IP67.
Functions LEDs Output
Current
consumption
Auxiliary stop light 8 red 12 V/1.7 W 0.12 A
Open cable ends 2DA 012 596-001
Auxiliary stop light 8 red 24 V/1.7 W 0.24 A
Open cable ends 2DA 012 596-011
Type approval: ECE
4128, SAE, CCC
76
REAR LAMPS
This LED product has the following features:
LED AUXILIARY STOP LAMPS
For horizontal mounting, with 12 red LEDs, in clear optics, with 3D depth effect.
Each of the 12 LEDs is embedded in a separate reflector. With 200 mm cable.
Approved for ECE.
Functions LEDs Output
Current
consumption
Auxiliary stop light 12 red 12 V /1.8 W 0.15 A
Open cable ends 2DA 343 800-001
Type approval: ECE
7715
This product has the following features:
AUXILIARY STOP LAMPS
For installation in body or rear spoiler. Red lens and black housing. With 12 V bulb.
Without cable. Approved for ECE.
Functions Output Current consumption
Auxiliary stop light 12 V /1.8 W 0.15 A
Open cable ends 2DA 007 421-001
Type approval: ECE
02198, SAE
This LED product has the following features:
REPULSE PRO REVERSING LIGHT
870 lumen, power requirement: 11 watts, colour temperature: 5,500 kelvins,
heat-conducting plastic housing, total corrosion protection thanks to Thermo-Pro-
technology, upright/pendant mounting. With 3 LEDs.
AMP-SUPERSEAL connector (2-pin) with 2,000 mm cable 2ZR 012 456-001
EasyConn connector (2-pin) with 1,000 mm cable 2ZR 012 456-011
6.3 mm flat receptacles with 3,000 mm cable 2ZR 012 456-021
Type approval: ECE-R23, ECE-R10,
0017
77
HELLA SIDE MARKER LAMPS
Side marker lamps are an important safety feature making it easier for other road users to see the vehicle contour,
especially during darkness. Vehicles with large dimensions, e.g. harvesters, long transporters, etc. in particular can be
better represented that way. In some countries, active side marker lamps are required by law from a certain vehicle
length.
HELLA side marker lamps meet the highest standards even in demanding application fields and are a convincing
offering thanks to their durability and HELLA's well-known high quality.
SIDE MARKER LAMPS
REFLEX REFLECTORS
For horizontal or vertical mounting. Effective area of reflection 22 cm².
Approved for ECE.
20 each:
Red, self-adhesive 8RA 003 326-031
Red, screw attachment (w/o fig.) 8RA 003 326-001
Amber, self-adhesive 8RA 003 326-041
Amber, screw attachment (w/o fig.) 8RA 003 326-011
White, self-adhesive 8RA 003 326-051
White, screw attachment (w/o fig.) 8RA 003 326-021
Type approval: -001, -011, -021 ECE
0221395, -031, -041, -051 ECE 92031
Adhesive attachment Screw attachment: Ø 4.3 mm
REFLEX REFLECTORS
Made of PMMA material, with white base plate. Effective area of reflection 22 cm².
Approved for ECE.
25 each:
Red, self-adhesive 8RA 002 014-281
Red, screw attachment (w/o fig.) 8RA 002 014-231
Amber, self-adhesive 8RA 002 014-301
Amber, screw attachment (w/o fig.) 8RA 002 014-251
White, self-adhesive 8RA 002 014-291
White, screw attachment (w/o fig.) 8RA 002 014-241
Type approval: -231, -241, -251 ECE
020030, -281, -291, -301 ECE 020031
Adhesive attachment Screw attachment
TRIANGULAR REFLEX REFLECTOR
Effective area of reflection 85 cm². Approved for ECE.
Red, with plastic base plate and 2 holes Ø 6 mm, for
fastening screws
8RA 002 020-001
Red, with plastic base plate and additional metal base
plate, 2 fastening screws M5 x 20
8RA 002 020-051
Type approval: ECE
02346
79
SIDE MARKER LAMPS
SIDE MARKER LAMP
For horizontal or vertical installation, with reflex reflector,
12 V or 24 V bulb, white or amber base plate. Approved for ECE.
White base plate, 12 V/3 W 2PS 962 964-031
Amber base plate, 24 V/3 W 2PS 962 964-012
Type approval:
023153, 0004, SAE A P2 95, CCC 1090007
A
B
90 mm
51,2 mm
111,3 mm
B
A
20,9 mm
0,5 mm
LED SIDE MARKER LAMP WITH REFLEX REFLECTOR
With light guide, passive electronics and ADR/GGVS tested, mounting via 5.8 mm
screw holes, operating temperature -40 °C to +60 °C, protection class IP 5K9K.
Tested according to HELLA norm 67101 class 5.1. Approved for ECE.
Functions LEDs Output
Current
consumption
Side marker light and
reflex reflector
2 amber 1.2 W / 24 V approx. 0.05 A
With 500 mm cable, open cable ends 2PS 345 600-011
Type approval:
5881
This LED product has the following features:
This product has the following features:
80
SIDE MARKER LAMPS
This LED product has the following features:
LED SIDE MARKER LAMP WITH REFLEX REFLECTOR
For horizontal or vertical mounting, amber lens, amber light, black housing.
With horizontal mounting, the optical field must point towards the outer edge of
the vehicle. With cellular rubber seal for sealing the lamp and 2 holes for B4.2
fastening screws, or by using a bracket (to be ordered separately).
Protection class IP 6K9K. Also suitable for flash function. ADR/GGVS tested.
Functions LEDs Output
Current
consumption
Side marker light 1 amber 24 V/1.2 W approx. 0.05 A
Mounting
Horizontal mounting, with 1,500 mm cable 2PS 008 645-001
Vertical mounting, with 1,500 mm cable 2PS 008 645-991
For horizontal mounting, with EasyConn connector housing (2-pin)
With 1,300 mm cable 2PS 008 645-311
For horizontal mounting, with quick link wiring
With 1,300 mm cable 2PS 008 645-621
For horizontal mounting, with AMP-SUPERSEAL plug connection
With 500 mm cable 2PS 008 645-891
Accessories
Bracket 8HG 160 409-002
Type approval:
021395, 001396, 021397, 001397, SAE AP2 01,
CCC A047950
  
81
HELLA MARKER LAMPS
With HELLA's licence plate lamps, clearance lamps, position lamps and direction indicators, you can ensure that the
vehicle is clearly visible to all road users, even in the dark and when visibility is poor. A clear advantage for the safety
of each individual situation, whether on the road or during field work. Throughout, we are always committed to the
greatest quality and implement innovative and efficient technologies for the lamps, such as LED technology.
With up to 80 % less power consumption than conventional bulb technology, our lamps are paving the way towards
more design and safety with maximum service lives. Frequent bulb replacements are not only time-consuming,
but also cost-intensive in the long run, especially for trucks and agricultural machinery with high mileages.
Therefore, retrofitting to the innovative HELLA LED lamps is an efficient choice in every which way!
HELLA marker lamps are also characterised by outstanding quality when it comes to workmanship and stability –
and their long service life proves it.
Do not leave safety to chance – put your trust in HELLA marker lamps.
MARKER LAMPS
This LED product has the following features:
LED LICENCE PLATE LAMP FOR LICENCE PLATE 520 X 120 MM
For installation above the licence plate (520 x 120 mm), 2 lamps required to
illuminate the licence plate, protection class IP 6K9K.
Functions LEDs Output
Current
consumption
Licence plate light 4 white 24 V / 1 W approx. 0.04 A
With frame, without cable, flat connector 6.3 x 0.8 mm 2KA 010 278-011
Functions LEDs Output
Current
consumption
Licence plate light 4 white 12 V / 1 W approx. 0.08 A
With frame, without cable, flat connector 6.3 x 0.8 mm 2KA 010 278-311
Type approval:
2609

This LED product has the following features:
LED LICENCE PLATE LAMP
For mounting to the right or left of the licence plate,
with 4 LEDs, clear lens, black plastic housing,
with 6.3 x 0.8 mm flat connector.
For 520 x 120 mm licence plates,
only 1 lamp required for illumination
12 V/1 W, current consumption = approx. 0.08 A 2KA 010 278-321
24 V/1 W, current consumption = 0.04 A 2KA 010 278-021
Type approval:
2609
For 340 x 240 mm and 280 x 200 mm licence plates
12 V/1 W, current consumption = approx. 0.08 A 2KA 010 278-421
24 V/1 W, current consumption = 0.04 A 2KA 010 278-121
Type approval:
2911

83
LICENCE PLATE LAMP
For licence plate 340 x 240 mm:
Mounting above or below the licence plate. (1 lamp)
For licence plate 520 x 120 mm:
Mounting on the side or above the licence plate (2 lamps)
For licence plate 240 x 165 mm:
Mounting on the side of the licence plate (1 or 2 lamps)
Licence plate light 10 W for 6 V, 12 V or 24 V applications;
scope of delivery without bulb
Housing colour: grey
For screw attachment, 6.3 mm flat connector and grommet 2KA 003 389-001
Housing colour: black
For screw attachment, 6.3 mm flat connector and grommet 2KA 003 389-061
Type approval:
22819, SAE, CCC (only -061)
Spare parts/accessories
R10W bulb
12 V 8GA 002 071-131
24 V 8GA 002 071-251
24 V (HD) 8GA 002 071-271
MARKER LAMPS
This LED product has the following features:
#20
(93)
72
(32)
LED LICENCE PLATE LAMP
EMC approval class 3, operating temperature -40 °C to +85 °C, protection class
IP 5K9K. Tested according to HELLA norm 67101 class 5.1. Multi voltage.
Functions LEDs Output
Current
consumption
Licence plate light 2 white
12 V/0.3 W
24 V/0.6 W
0.03 A
Housing colour: black
With 2,000 mm cable and 6.3 mm flat receptacles 2KA 012 271-031
With 1,300 mm cable and EasyConn connector 2KA 012 271-051
With 1,300 mm cable and SUPERSEAL connector 2KA 012 271-061
Housing colour: white
With 2,000 mm cable and 6.3 mm flat receptacles 2KA 012 271-231
With 1,300 mm cable and EasyConn connector,
90° angled
2KA 012 271-271
Type approval:
2609
  
Also available: the Krone rear lamp
Further information on these products can be found in the
Rear lamps chapter on page 67.
84
CLEARANCE LAMPS
LICENCE PLATE LAMP
For licence plate 340 x 240 mm:
Mounting above the licence plate (1 lamp)
Mounting on the side of the licence plate (2 lamps)
For licence plate 520 x 120 mm:
Mounting on the side or above the licence plate (2 lamps)
Housing colour: black, 2 pieces
For screw attachment, 6.3 mm flat connector and grommet 2KA 001 386-231
Spare parts/accessories
C5EW bulb
12 V 8GM 002 092-121
Type approval:
12820
LED CLEARANCE LAMP
LED end-outline marker, vertical mounting, protection class IP 6K9K,
operating temperature -40 °C to +50 °C.
Functions LEDs Output
Current
consumption
Side marker light,
position light and
clearance light
4
12 / 24 V
0.9/1.8 W
approx. 0.08 A
With 500 mm cable and EasyConn connector (2-pin), 90°
Left 2XS 011 744-011
Right 2XS 011 744-021
With 3,000 mm cable and 6.3 mm flat receptacles
Left 2XS 011 744-031
Right 2XS 011 744-041
With 2,000 mm cable and AMP-SUPERSEAL
Left 2XS 011 744-051
Right 2XS 011 744-061
With 1,000 mm cable and quick link
Left 2XS 011 744-191
Right 2XS 011 744-181
Type approval:
11392, 10R-057951
This LED product has the following features:
   
This product has the following features:
85
CLEARANCE LAMPS
This LED product has the following features:
LED CLEARANCE LAMP
LED end-outline marker, short mounting, protection class IP 6K9K,
operating temperature -40 °C to +50 °C.
Functions LEDs Output
Current
consumption
Side marker light,
position light and
clearance light
4
12 / 24 V
0.9/1.8 W
approx. 0.08 A
With 500 mm cable and quick link connector 2XS 011 768-001
With 500 mm cable and EasyConn connector (2-pin),
not angled
2XS 011 768-021
With 2,000 mm cable and AMP-SUPERSEAL 2XS 011 768-031
With 400 mm cable and DEUTSCH connector 2XS 011 768-117
 
This LED product has the following features:
LED CLEARANCE LAMP
LED end-outline marker, horizontal mounting, protection class IP 6K9K,
operating temperature -40 °C to +50 °C.
Functions LEDs Output
Current
consumption
Side marker light,
position light and
clearance light
4
12 / 24 V
0.9/1.8 W
approx. 0.08 A
With 500 mm cable and EasyConn connector (2-pin)
Left 2XS 011 769-011
Right 2XS 011 769-021
With 670 mm cable and quick link connector
Left 2XS 011 769-091
Right 2XS 011 769-101
 
86
CLEARANCE LAMPS/DIRECTION INDICATORS
REAR-LOGIC CLEARANCE LAMP
For mounting on side of trailers. Lens for clearance light clear to front, red to rear,
side marker reflector light amber.
Housing made of black plastic, with grommet
Screw attachment, left 2XS 007 841-011
Screw attachment, right 2XS 007 841-021
When used on towing vehicles, the clear lens must be replaced with a black
9EL 148 673-021 lens.
AUXILIARY DIRECTION INDICATOR LAMP
For side mounting, category 5 and 6 for 12 V and 24 V/21 W, with bulb,
GGVS/ADR suitable.
Left 2BM 006 692-011
Right 2BM 006 692-021
Type approval:
0152621
AUXILIARY DIRECTION INDICATOR LAMP
For side mounting, category 6 for 24 V/21 W, without bulb,
very flat design, ECE and SAE approved.
Lens, amber 2BM 008 355-001
Type approval:
1059 (P21W), 1848 (PY21W), SAE
This product has the following features:
This product has the following features:
This product has the following features:
87
DIRECTION INDICATORS
This LED product has the following features:
LED AUXILIARY DIRECTION INDICATOR LAMP CATEGORY 6
With black frame.
Functions LEDs Output
Current
consumption
Additional direction
indicator light
7 amber
12 V/4.8 W
24 V/3.5 W
0.4 A
0.15 A
12 V, direct screw connection, AMP SUPERSEAL 2BM 011 788-011
12 V, direct screw connection, 500 mm cable, with open
cable end
2BM 011 788-031
24 V, direct screw connection, AMP SUPERSEAL 2BM 011 788-001
24 V, direct screw connection, 500 mm cable, with open
cable end
2BM 011 788-021
Spare parts/accessories
Frame, black 9AB 194 559-007
AMP-SUPERSEAL mating connector (AMP no. 282080-1) 8JA 746 184-022
Type approval:
7506, ECE, SAE, CCC
 
Direction of travel →
Framed variant
This LED product has the following features:
LED AUXILIARY DIRECTION INDICATOR LAMP CATEGORY 6
Without frame.
Functions LEDs Output
Current
consumption
Additional direction
indicator light
7 amber
12 V/4.8 W
24 V/3.5 W
0.4 A
0.15 A
12 V, self-adhesive, AMP-SUPERSEAL 2BM 011 788-051
12 V, self-adhesive, 500 mm cable, with open cable end 2BM 011 788-071
24 V, self-adhesive, AMP-SUPERSEAL 2BM 011 788-041
24 V, self-adhesive, 500 mm cable, with open cable end 2BM 011 788-061
Spare parts/accessories
AMP-SUPERSEAL mating connector (AMP no. 282080-1) 8JA 746 184-022
Type approval: ECE
 
Direction of travel →
Self-adhesive variant
88
DIRECTION INDICATORS/POSITION LAMPS
HAZARD WARNING LAMP MODEL 3003 ACCU
When the motor is running, the battery is charged via contacts in the charging
bracket.
Automatic vehicle electrical system voltage changeover 12/24 V, operating time in
flashing mode 40 hours or 7 hours with work light.
Charging bracket and lead-gel battery included in scope of delivery.
Type tested 2XW 007 146-011
HAZARD WARNING LAMP MODEL 3003
With fastening bracket (for battery operation with 5 mono cells, not included in
scope of delivery).
Type tested 2XW 007 146-001
This LED product has the following features:
LED POSITION LAMP WITH REFLEX REFLECTOR
For horizontal and vertical mounting, white light, black housing and black plastic
base plate. With horizontal mounting, the LED field must point to the outer
edge of the vehicle. With vertical mounting, the LED field may point upwards or
downwards. The lamp is mounted via lateral mounting holes (for B4.2 screws) or
by means of a bracket (to be ordered separately). Protection class IP 6K9K. ADR/
GGVS tested.
Functions LEDs Output
Current
consumption
Position light
(with reflector)
1 white 24 V/0.9 W approx. 0.04 A
With 500 mm cable and open cable ends 2PG 008 645-971
With 1,300 mm cable and quick link coupling 2PG 008 645-541
Type approval:
021395
 
89
POSITION LAMPS
 
This LED product has the following features:
LED POSITION LAMP WITH REFLEX REFLECTOR
For horizontal mounting, white light, black housing and black plastic base plate.
The lamp is mounted via lateral mounting holes (for B4.2 screws) or by means of a
bracket (to be ordered separately).
Protection class IP 6K9K.
Functions LEDs Output
Current
consumption
Position light
(with reflector)
1 white 24 V/0.9 W approx. 0.04 A
With 450 mm cable and AMP-SUPERSEAL connector 2PG 008 645-831
Type approval:
021395

This LED product has the following features:
LED TAIL LAMP WITH REFLEX REFLECTOR
For horizontal or vertical mounting, red light, red lens, black housing and
2 holes for B4.2 fastening screws. Can be mounted using a bracket (to be ordered
separately). Can also be used as clearance lamp with reflex reflector. With pulse for
direction indicator failure control.
With horizontal mounting, the LED field must point to the outer edge of the vehicle.
For vertical mounting, the LED field may point upwards or downwards.
Functions LEDs Output
Current
consumption
Tail light with
reflex reflector
1 red 24 V/1.2 W approx. 0.05 A
With 5,000 mm cable and EasyConn connector housing
(2-pin)
2TM 008 645-351
With 5,000 mm cable with quick link coupling incl. Clamping
piece for contacting a 2-wire flat cable
2TM 008 645-661
With 500 mm cable 2TM 008 645-951
Type approval:
021395, 021398, SAE
90
POSITION LAMPS
This LED product has the following features:
LED TAIL LAMP WITH REFLEX REFLECTOR
With light guide, passive electronics and ADR/GGVS tested, mounting via 5.8 mm
screw holes, operating temperature -40 °C to +50 °C, protection class IP 6K9K.
Tested according to HELLA norm 67001 class 6.3. Approved for ECE.
Functions LEDs Output
Current
consumption
Tail light with reflex
reflector
2 24 V/1.2 W
0.05 A
0.05 A
With 5,000 mm cable 2TM 345 600-311
Type approval:
5881

This LED product has the following features:
LED POSITION LAMP WITH REFLEX REFLECTOR
For horizontal mounting, through 2 x 5.8 mm holes, passive electronics,
ADR/GGVS tested, operating temperature from -40 °C to +50 °C,
protection class IP 6K9K. Approved according to HELLA norm 67101, class 6.3.
Functions LEDs Output
Current
consumption
Position light 2 white 24 V/1.2 W 0.05 A
With 500 mm cable 2PG 345 600-401
Type approval:
5881

91
Work lights
Ultra Beam
Power Beam
Oval
Q90
Module 50/70/90
Flat Beam
Beacons
Front lighting
L 4060
Bi-LED
Low beam and high beam
Premium
Performance
Rota LED Compact
K-LED Blizzard
ROTA LED
K-LED Rebelution
92
PRODUCT OVERVIEW
Trailer rear lighting
Marker lamps and clearance lamps
LED
clearance lamp
LED side
marker lamp
LED
licence plate lamp
Repulse Pro
Hybrid and full LED
rear lamp with Krone logo
"COLUNA"
full LED rear lamp
Truck rear lighting
Full LED truck
rear lamp
LED hybrid
rear lamp
Hybrid and full
LED rear lamp
Auxiliary headlamps
Jumbo 320 FF
LED Light Bar
Luminator LED
Luminator Compact LED/X
Luminator Chromium
Rallye 3003 LED
Rallye 3003 Compact
93
Order no. Page
1AL…
1AL 009 998-001 50
1AL 009 998-021 50
1AL 009 998-041 50
1AL 010 820-021 49
1AL 012 758-001 49
1AL 012 758-021 49
1AL 012 758-101 49
1AL 012 758-121 49
1BL…
1BL 009 999-001 50
1BL 009 999-021 50
1BL 009 999-041 50
1BL 010 820-001 49
1BL 012 488-001 46
1BL 012 488-021 46
1BL 012 488-101 46
1BL 012 488-121 46
1BL 247 042-007 51
1BL 247 042-017 51
1BL 247 042-177 51
1BL 247 042-217 50
1FO…
1F0 011 988-021 47
1F0 011 988-031 47
1F0 011 988-071 47
1F0 011 988-081 47
1F0 011 988-121 47
1F0 011 988-131 47
1F0 011 988-171 47
1F0 011 988-181 47
1F0 012 206-001 55
1F0 012 206-011 55
1F3…
1F3 009 094-031 57, 60
1F3 009 094-071 57
1F3 009 094-071 57
1F3 010 119-101 59, 61
1F3 010 119-111 59
1F3 011 815-001 60
1F3 011 815-011 55
1F8…
1F8 007 560-211 56
1F8 007 560-311 56
1F8 007 560-341 56
1F8 007 560-411 56, 60
1F8 007 560-451 56, 60
1F8 009 797-101 59, 61
1F8 009 797-341 59, 61
1F8 009 797-431 58, 61
1F8 009 797-451 58, 61
Order no. Page
1F8 016 560-001 55, 60
1F8 016 560-011 55, 60
1F8 016 560-021 55, 60
1F8 016 560-031 55, 60
1F8 016 797-001 58
1F8 016 797-011 58
1F8 241 400-011 55, 56, 58, 59
1F8 241 429-011 55, 56, 58, 59
1FA…
1FA 996 197-151 54
1FA 996 197-181 54, 61
1FE…
1FE 008 773-001 57, 61
1FE 008 773-011 57
1FE 008 773-041 57, 61
1FE 008 773-081 57, 61
1FJ…
1FJ 360 002-502 54, 61
1FJ 958 040-072 54, 60
1FJ 958 040-082 54, 60
1FJ 958 130-011 53, 60
1FJ 958 130-111 53, 60
1FJ 958 130-301 53, 60
1G0…
1G0 357 101-012 25
1G0 357 108-012 24
1G0 995 050-001 19
1G0 995 050-011 19
1G0 995 050-021 19
1G0 995 050-051 28
1G0 995 050-061 28
1G0 995 050-071 28
1G0 995 050-081 28
1G0 996 210-001 29
1G0 996 210-011 29
1G0 996 263-031 16
1G0 996 263-051 16
1G0 996 276-701 18
1G0 996 376-631 18
1G0 996 476-001 16
1G0 996 476-011 16
1G0 996 476-031 16
1G0 996 476-041 16
1G0 996 476-121 16
1G0 996 476-131 16
1G0 996 576-001 17
1G0 996 576-011 17
1G0 996 576-031 17
1G0 996 576-041 17
1G1…
1G1 357 105-022 26
Order no. Page
1GA…
1GA 357 103-012 25
1GA 357 103-022 25
1GA 357 103-082 25
1GA 357 106-022 26
1GA 357 106-032 26
1GA 357 107-012 24
1GA 357 107-022 24
1GA 357 109-002 27
1GA 995 193-001 20
1GA 995 193-011 20
1GA 995 193-021 20
1GA 995 193-031 20
1GA 995 193-041 20
1GA 995 506-001 13
1GA 995 506-011 13
1GA 995 506-031 13
1GA 995 506-081 13
1GA 995 606-001 13
1GA 995 606-011 13
1GA 995 606-071 13
1GA 995 606-081 13
1GA 995 606-171 13
1GA 996 188-501 14
1GA 996 188-511 14
1GA 996 284-001 15
1GA 996 284-011 15
1GA 996 284-081 15
1GA 996 284-091 15
1GA 996 488-001 14
1GA 996 488-011 14
1GA 996 761-001 19
1GA 996 761-011 19
1GA 996 761-021 19
1GA 996 761-101 15
1GA 996 761-111 15
1GA 996 761-171 15
1GA 996 761-191 15
1GD…
1GD 996 193-001 20
1GD 996 193-011 20
1GD 996 193-051 20
1GE…
1GE 360 000-002 27
1GJ…
1GJ 360 001-002 27
1GJ 360 002-002 27
1GJ 360 003-002 27
1GJ 958 040-501 21
1GJ 958 130-461 53
94
ORDER NUMBER OVERVIEW
Order no. Page
1HO…
1H0 996 376-491 17
1H0 996 476-501 17
1H0 996 476-511 17
1K0…
1K0 247 043-007 51
1K0 247 043-017 51
1K0 247 043-027 51
1K0 247 043-037 51
1K0 247 043-117 51
1K0 247 043-127 51
1K0 247 043-157 51
1K0 247 043-167 51
1KO 247 043-117 50
1KO 247 043-127 50
1KO 247 043-157 50
1KO 247 043-167 50
1LL…
1LL 009 998-011 50
1LL 009 998-051 50
1LL 010 820-031 49
1LL 012 758-011 49
1LL 012 758-111 49
1ML…
1ML 009 999-011 50
1ML 009 999-051 50
1ML 010 820-011 49
1ML 012 488-011 46
1ML 012 488-031 46
1ML 012 488-111 46
1ML 012 488-131 46
1ML 247 042-027 51
1ML 247 042-037 51
1ML 247 042-187 50, 51
1ML 247 042-227 50
1N0…
1N0 011 988-001 48
1N0 011 988-011 48
1N0 011 988-051 48
1N0 011 988-061 48
2BA…
2BA 980 888-211 74
2BA 980 888-311 73
2BA 980 888-411 73
2BA 980 888-511 73
2BA 980 888-611 73
2BM…
2BM 006 692-011 87
2BM 006 692-021 87
Order no. Page
2BM 008 355-001 87
2BM 011 788-001 88
2BM 011 788-011 88
2BM 011 788-021 88
2BM 011 788-031 88
2BM 011 788-041 88
2BM 011 788-051 88
2BM 011 788-061 88
2BM 011 788-071 88
2DA…
2DA 007 421-001 77
2DA 012 596-001 76
2DA 012 596-011 76
2DA 343 106-001 76
2DA 343 106-011 76
2DA 343 106-021 76
2DA 343 106-031 76
2DA 343 800-001 77
2DA 980 887-311 74
2DA 980 887-411 74
2KA…
2KA 001 386-231 85
2KA 003 389-001 84
2KA 003 389-061 84
2KA 010 278-011 83
2KA 010 278-021 83
2KA 010 278-121 83
2KA 010 278-311 83
2KA 010 278-321 83
2KA 010 278-421 83
2KA 012 271-031 84
2KA 012 271-051 84
2KA 012 271-061 84
2KA 012 271-231 67, 84
2KA 012 271-271 67, 84
2NE…
2NE 980 889-501 75
2NE 980 889-601 75
2NR…
2NR 013 155-201 72
2NR 013 155-211 72
2NR 013 155-221 72
2PG…
2PG 008 645-541 89
2PG 008 645-831 90
2PG 008 645-971 89
2PG 345 600-401 91
2PS…
2PS 008 645-001 81
2PS 008 645-311 81
Order no. Page
2PS 008 645-621 81
2PS 008 645-891 81
2PS 008 645-991 81
2PS 345 600-011 80
2PS 962 964-012 80
2PS 962 964-031 80
2RL…
2RL 010 979-001 37
2RL 010 979-011 37
2RL 010 979-021 37
2RL 011 484-001 36
2RL 011 484-011 36
2RL 011 484-021 36
2RL 012 983-301 38
2RL 012 983-401 38
2RL 014 979-001 36
2RL 014 979-011 36
2RL 014 979-021 36
2RL 455 256-001 35
2SB…
2SB 980 887-211 73
2SD…
2SD 013 155-001 72
2SD 013 155-011 72
2SD 013 155-021 72
2SD 013 155-031 72
2SD 013 155-101 72
2SD 013 155-111 72
2TM…
2TM 008 645-351 90
2TM 008 645-661 90
2TM 008 645-951 90
2TM 345 600-311 91
2VD…
2VD 012 381-011 65
2VD 012 381-031 65
2VD 012 381-211 66
2VD 012 381-251 66
2VD 012 381-311 66
2VD 012 381-351 66
2VP
2VP 012 381-021 65
2VP 012 381-041 65
2VP 012 381-051 65
2VP 012 381-061 65
2VP 012 381-081 65
2VP 012 381-221 66
2VP 012 381-241 66
2VP 012 381-261 66
2VP 012 381-281 66
95
Order no. Page
2VP 012 381-321 66
2VP 012 381-341 66
2VP 012 381-361 66
2VP 012 381-381 66
2VP 340 960-011 69
2VP 340 960-021 69
2VP 340 960-111 69
2VP 340 960-121 69
2VP 340 960-231 67
2VP 340 960-241 67
2VP 340 960-251 67
2VP 340 960-261 67
2VP 340 960-271 69
2VP 340 960-281 69
2VP 340 961-011 68
2VP 340 961-021 68
2VP 340 961-031 68
2VP 340 961-041 68
2VP 340 961-111 68
2VP 340 961-121 68
2VP 340 961-131 68
2VP 340 961-141 68
2VP 340 961-151 68
2VP 340 961-161 68
2VP 340 961-211 68
2VP 340 961-221 68
2VP 340 961-411 68
2VP 340 961-421 68
2VP 340 961-431 68
2VP 340 961-441 68
2VP 340 961-511 67
2VP 340 961-521 67
2VP 340 961-531 67
2VP 340 961-541 67
2VP 340 964-011 69
2VP 340 964-021 69
2VP 340 964-111 69
2VP 340 964-121 69
2VP 340 965-111 68
2VP 340 965-121 68
2VP 345 900-011 70
2VP 345 900-021 70
2VP 345 900-091 70
2VP 345 900-101 70
2VP 345 900-131 70
2VP 345 900-141 70
2VP 345 900-241 71
2VP 345 900-251 71
2VP 345 900-261 71
2VP 345 900-271 71
2VP 345 900-441 71
2VP 345 900-451 71
2VP 345 900-461 71
2VP 345 900-471 71
Order no. Page
2XD…
2XD 011 557-101 39
2XD 011 557-201 39
2XD 011 557-301 39
2XD 011 557-811 39
2XD 011 557-841 39
2XD 012 160-801 43
2XD 012 160-811 43
2XD 012 160-821 43
2XD 012 160-831 43
2XD 012 160-851 43
2XD 012 160-861 43
2XD 012 160-901 43
2XD 012 160-911 43
2XD 012 160-951 43
2XD 012 160-961 43
2XD 012 878-001 37
2XD 012 878-011 37
2XD 012 878-021 37
2XD 012 972-001 36
2XD 012 972-011 36
2XD 012 972-021 36
2XD 012 980-001 38
2XD 012 980-011 38
2XD 012 980-021 38
2XD 012 984-301 38
2XD 012 984-401 38
2XD 013 979-001 36
2XD 013 979-011 36
2XD 013 979-021 36
2XD 014 560-001 43
2XD 014 560-101 43
2XD 014 560-201 43
2XD 014 560-401 43
2XD 014 561-001 42
2XD 014 561-101 42
2XD 014 561-201 42
2XD 014 561-401 42
2XD 014 561-601 42
2XD 014 561-701 42
2XD 014 562-001 42
2XD 014 562-201 42
2XD 014 562-601 42
2XD 014 563-001 42
2XD 014 563-201 42
2XD 014 563-601 42
2XD 014 592-001 42
2XD 014 592-201 42
2XD 014 592-601 42
2XD 455 255-001 35
Order no. Page
2XS…
2XS 007 841-011 87
2XS 007 841-021 87
2XS 011 744-011 85
2XS 011 744-021 85
2XS 011 744-031 85
2XS 011 744-041 85
2XS 011 744-051 85
2XS 011 744-061 85
2XS 011 744-181 85
2XS 011 744-191 85
2XS 011 768-001 86
2XS 011 768-021 86
2XS 011 768-031 86
2XS 011 768-117 86
2XS 011 769-011 86
2XS 011 769-021 86
2XS 011 769-091 86
2XS 011 769-101 86
2XW
2XW 007 146-001 89
2XW 007 146-011 89
2ZR…
2ZR 012 456-001 77
2ZR 012 456-011 77
2ZR 012 456-021 77
2ZR 012 456-201 31
2ZR 012 456-211 31
2ZR 012 456-221 31
2ZR 980 889-011 75
2ZR 980 889-111 75
2ZR 980 889-211 75
2ZR 980 889-311 75
2ZR 996 188-521 14, 30
2ZR 996 284-501 31
2ZR 996 284-511 31
2ZR 996 376-091 30
4DW
4DW 009 492-011 65, 66
5DS…
5DS 227 488-101 65, 66
5KG…
5KG 011 630-101 41
8EN…
8EN 332 584-001 33
96
ORDER NUMBER OVERVIEW
Order no. Page
8GA…
8GA 002 071-131 84
8GA 002 071-251 84
8GA 002 071-271 84
8GH…
8GH 002 089-131 59
8GH 002 089-251 59
8GH 007 157-121 59
8GH 007 157-241 59
8GM…
8GM 002 092-121 85
8HG…
8HG 002 365-001 32, 40
8HG 004 806-001 32
8HG 006 294-011 40
8HG 006 294-021 40
8HG 006 294-031 40
8HG 006 294-041 40
8HG 006 294-051 40
8HG 006 294-091 40
8HG 006 294-101 40
8HG 006 294-111 40
8HG 006 294-141 40
8HG 096 531-007 40
8HG 096 531-107 40
8HG 096 531-117 40
8HG 096 531-127 40
8HG 096 531-137 40
8HG 160 409-002 81
8HG 331 414-372 32
8HG 332 912-002 32
8HG 958 128-811 54
8HG 958 139-071 54
8HG 958 139-841 54
8HG 990 263-111 32
8HG 990 263-131 32
8HG 990 320-001 32
8HG 990 320-011 32
8HG 992 377-042 32
8HG 994 412-372 32
8HG 994 974-002 32
8JA…
8JA 009 256-801 33
8JA 201 022-801 33
8JA 201 022-831 33
8JA 746 184-022 88
8JA 990 295-217 33
Order no. Page
8JB…
8JB 001 946-011 41
8JB 001 946-021 41
8JB 001 946-101 41
8JB 004 123-031 41
8JB 004 777-001 41
8JB 004 777-002 41
8JB 850 434-011 41
8JD…
8JD 158 175-807 33
8JD 990 295-037 33
8KB…
8KB 990 299-001 33
8KB 990 299-011
13, 14, 15, 16, 18,
19, 27, 28, 30, 33
8KB 990 299-311 33
8KB 990 299-331 33
8KB 990 299-361 33
8RA…
8RA 002 014-231 79
8RA 002 014-241 79
8RA 002 014-251 79
8RA 002 014-281 79
8RA 002 014-291 79
8RA 002 014-301 79
8RA 002 020-001 79
8RA 002 020-051 79
8RA 003 326-001 79
8RA 003 326-011 79
8RA 003 326-021 79
8RA 003 326-031 79
8RA 003 326-041 79
8RA 003 326-051 79
8XS…
8XS 958 337-021 53
8XS 958 337-031 53
8XS 958 337-111 53
9AB…
9AB 194 559-007 88
9AG…
9AG 195 614-001 55
9AG 195 614-011 55
9AG 199 812-011 55
Order no. Page
9EL…
9EL 183 432-031 67
9EL 183 432-041 67
9EL 208 551-001 66
9EL 208 551-011 65
9EL 213 522-001 72
9ES 199 813-001 55
9GH…
9GH 096 532-001 41
9GH 096 532-007 41
9XD…
9XD 990 298-001 32
9XD 990 298-031 32
9XS…
9XS 130 261-001 32
9XX…
9XX 340 814-017 72
97
98
NOTES
99
FOCUS ON CUTTING-EDGE
TECHNOLOGY
As the technological leader for intelligent light
distribution systems, halogen, xenon and full
LED headlamps, and as a partner to renowned
international automotive manufacturers, HELLA
always meets the highest expectations and
quality standards. We have also applied this
standard to our range of bulbs:
Top technology in uncompromisingly high,
laboriously tested quality. In practice, this means
optimal visibility thanks to premium light quality
and minimum failure rates.
The HELLA bulb range covers a wide range of
applications and therefore offers the right light
source for every requirement. The HELLA range has
everything to offer: whether it's proven Standard
lamps, Lifetime for a longer service life,
PORTFOLIO:
THE RIGHT ONE FOR EVERYONE
Performance for higher light output or Design for a
special look!
STANDARD BLUE LIGHT PERFORMANCE
+ 120
CHROME TOP 2.0
Which bulb is right for each vehicle and area of use?
The answer to these and many other questions can be
found using the brand new and completely innovative
HELLA lamp configurator with many additional
functions. In addition to detailed information on the
HELLA bulb range, the configurator allows you to
identify the right bulb for your specific requirements in
just a few clicks – easily, quickly and conveniently!
www.hella.com/bulbs
THE FASTEST WAY TO
THE RIGHT HELLA LIGHT SOURCE
df?
HELLA b lb th fi t ll t
T
O
L
I
G
HT SOURCE
www.hella.com/upc
HELLA GmbH & Co. KGaA
Rixbecker Straße 75
59552 Lippstadt, Germany
Tel.: +49 2941 38-0
Fax: +49 2941 38-7133
Internet: www.hella.com
© HELLA GmbH & Co. KGaA, Lippstadt
J01625/10.19
Subject to technical and price modifications